Table of Contents
Advertisement
/'
'Remove
assist gear. (E-ring 3, 1 pcl
) Remove friction pulley.
Remove worm gear. (E-ring 2, 1 pcl
'Remove
AUTO. STOP cam.
How to lemoYe dust cover
1) Pull two hinge shafs.
2) Remove two screvvs from cap mounting holder.
) Remove hinç mounting screw from dust cover.
) ln this state, replace dust cover.
F i g . 1 1
How to remoYe tulntable
lF Hold turn table on its circumference by hand and
turn 45 adaptor in centre in clockwise direction.
2) Turntable holder, 45 adaptor. and spring are removed.
I Remove back tid of the unit (by removing four fixing
screu6, T2-3 x 12) and hold tr.rrntable and flyralheel
by hand. Then turn turntable counterclockwise to
remove it from shafe
6. How to remove player unit
1) Remove four cover fixing screws (Tl-3 x l0) below
turntable.
2l Hold tone arm base with finger and move it towards
centre shaft, and stop above where cover wad.
F i s . 1 2
3) Remove five player-unit fixing screws (A and B) in
Fig. 13. Player unit can now be removed from cabinet
main body.
ody
nta
v i t h
res
rntO
p t n
ble.
. 2 1
rew
F i s . i '
' . )
Asslsl Geor
!
o
o
- 5 -
Advertisement
Table of Contents
