Water Intake Fault; Water Drainage Fault - Miele G 6100 Operating Instructions Manual

Water intake fault

Problem
The Intake/Drain indica‐
tor flashes on and off.
The dishwasher stops
during a program.
The Intake/Drain indica‐
tor flashes.
Fault code or
pears in the display.

Water drainage fault

Problem
The dishwasher stops
during a program.
The Intake/Drain indica‐
tor flashes.
Fault code shows in
the display.
Possible cause and solution
The water supply is turned off.
Turn on the water supply all the way.
Before fixing the fault:
Turn the dishwasher off with the
There is a problem with the water intake.
Turn on the water supply fully and start the pro‐
ap‐
gram again.
Clean the water intake filter (see "Frequently asked
questions").
The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.
Possible cause and solution
Before fixing the fault:
Turn the dishwasher off with the
There is a problem with the water intake.
There might be water in the wash cabinet.
Clean the filter system (see "Cleaning and care -
Filter system").
Clean the drain pump (see "Frequently asked
questions").
Clean the non-return valve (see "Frequently asked
questions").
Remove any kink or loop in the drain hose.
Frequently Asked Questions
button.
button.
59