Kelvinator MT630K5HPM series Instruction Manual page 9

OPERATION INSTRUCTION
This microwave oven applies modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
1.Clock Setting
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
1) Press " Clock " to choose 12-hour or 24-hour system.
2) Turn " " to adjust the hour figures, the input time should be within
0--23(24-hour) or 1--12(12-hour).
3) Press " Clock ", the minute figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press " Clock " to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " Stop/Clear ", the oven
will go back to the previous status automatically.
2. Microwave Cooking
Press " Power Level "several times to select the power you want. Turn "
to adjust the cooking time. Press " Start/Go " to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
1) Press " Power Level " once, the oven will display "P100".
2) Press " Power Level " once again to choose 80% power, the oven will
display "P80".
3) Turn " " to adjust the cooking time until the oven display"20:00"
(The maximum setting time is 95 minutes.)
4) Press " Start/Go " to start cooking, ":" will light.
Presses
Instructions
1
2
3
4
5
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 minute
1---5 minutes
5---10 minutes
10---30 minutes
30---95 minutes
Display
P100
P80
P50
P30
P10
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
9
"
Microwave
Power
100%
80%
50%
30%
10%