Wireless Router Setup Manual
Table 1.
Status Light Descriptions (continued)
Item Function
Activity
Blinking Amber
Solid Green
Blinking Green
LAN
Solid Green
5.
(Ports 1–4)
Blinking Green
Solid Amber
Blinking Amber
Off
a. On amber (default setting) signifies a 5 GHz interference-free Wireless-N and legacy 2.4 GHz 802.11g network. NETGEAR
recommends this if you have Dual Band clients (Dual Band Wireless-N laptops, Dual Band Wireless-N adapters) and/or 802.11
b/g laptops to connect.
b. On green signifies a 2.4 GHz Wireless-N network. NETGEAR recommends this if you have only 2.4 GHz Wireless-N clients
(most adapters are 2.4 GHz, if not specified as Dual Band) AND/OR 802.11 b/g laptops to connect.
c. On blue signifies a 5 GHz interference-free network.
For more information on modes, see
Security Options" on page
Resource CD.
Back Panel
The rear panel of the WNDR3300 router contains the items in the list that follows the figure.
Figure 3
4
Description
Initializing connection and obtaining an IP address.
An IP address has been received; ready to transmit data.
Data is being transmitted and received.
The LAN port has detected a 100 Mbps link with an attached device.
Data is being transmitted at 100 Mbps.
The LAN port has detected a 10 Mbps link with an attached device.
Data is being transmitted at 10 Mbps.
No link is detected on this port.
"Configuring Your Wireless Settings and
21, and the online User Manual, available on the
2
1
4
3
Getting to Know Your Wireless Router