How To Check That The Pc Recognizes The Device Properly; Windows Vista; Windows 7; Windows Xp - LG T1710BP Owner's Manual

How to check that the PC recognizes the device properly

Windows XP
y y
When the touch screen USB cable is connected to each USB port on the PC for the first time, the message "Found
New Hardware" appears as shown below. The message disappears in a few seconds; if you then touch the screen
with a stylus pen or fingertip and the mouse pointer moves, this means that the PC recognizes the device properly.
Once the PC has recognized the device properly, the information is stored in the registry on the PC so that the
message "Found New Hardware" does not appear again when the PC is turned on/off or the USB cable is connected/
removed.
Windows VISTA
y y
When the touch screen USB cable is connected to each USB port on the PC for the first time, messages such as
"Installing device driver software" and "USB Human Interface Device" will appear as shown below. The message
disappears in a few seconds; if you then touch the screen with a stylus pen or fingertip and the mouse pointer
moves, this means that the PC recognizes the device properly. Once the PC has recognized the device properly, the
information is stored in the registry of the PC so that messages such as "Installing device driver software" and "USB
Human Interface Device" do not appear again when the PC is turned on/off or the USB cable is connected/removed.
Windows 7
y y
When the touch screen USB cable is connected to each USB port on the PC for the first time, messages such as
"Installing device driver software" and "USB Human Interface Device" will appear as shown below. The message
disappears in a few seconds; if you then touch the screen with a stylus pen or fingertip and the mouse pointer
moves, this means that the PC recognizes the device properly. Once the PC has recognized the device properly, the
information is stored in the registry of the PC so that messages such as "Installing device driver software" and "USB
Input Device" do not appear again when the PC is turned on/off or the USB cable is connected/removed.
TOUCH SCREEN OWNER'S MANUAL
5