Table of Contents
Advertisement
OPES
®
MODEL: OP-WS01/WH1170
1. Inventory of contents................................................................... 2
2. Feature...................................................................................... 2
3. Set up guide............................................................................... 2
3.1 Battery install......................................................................... 2
3.2 Mounting................................................................................ 3
4. LCD overview.............................................................................. 4
4.1 LCD overview...................................................................... 4
4.2 Weather forecasting.............................................................. 4
4.3 Weather tendency indicator.................................................... 5
4.4 Examples of changing weather icons...................................... 5
4.5 Storm warning indicator........................................................ 5
5. Program modes........................................................................... 5
5.1 Quick display mode.............................................................. 5
5.2 Setting mode....................................................................... 6
5.2.1 Setting Calibrated Humidity ........................................... 6
5.2.2 Setting Barometric Pressure........................................... 6
5.3 Alarm mode......................................................................... 7
5.4 Min/Max mode..................................................................... 8
6. Problems and interference with operation......................................... 9
7. Specification............................................................. ..................... 9
This Operation Manual is part of this product and should be kept in a safe place for
future reference. It contains important notes on setup and operation.
WEATHER STATION
INSTRUCTION MANUAL
- 1 -
Page
Advertisement
Table of Contents
Summary of Contents for Opes OP-WS01/WH1170
-
Page 1: Table Of Contents
OPES WEATHER STATION ® INSTRUCTION MANUAL MODEL: OP-WS01/WH1170 Page 1. Inventory of contents…………………………………………..…………….. 2 2. Feature………………………………………………………………………….. 2 3. Set up guide……………………………………………………………………. 2 3.1 Battery install………………………………………………………………. 2 3.2 Mounting…………………………………………………………………..3 4. LCD overview…………………………………………………………………... 4 4.1 LCD overview……………………………………………………………. 4 4.2 Weather forecasting……………………………..………….………….. 4 4.3 Weather tendency indicator………………………………………….. -
Page 2: Inventory Of Contents
1) Insert two AAA batteries into the remote sensor 2) Insert three AA batteries into the Opes™ Weather Station. 3) Wait 3 minutes or until the outdoor temperature is displayed on the Opes™ Weather Station. Do not press any keys before outdoor sensor data is received. -
Page 3: Mounting
procedure again. Please wait 10seconds before you re-insert the battery to make sure both transmitter and receiver reset properly. Note for Radio Controlled Time: The time and date displayed is based on the signal provided by the highly accurate government operated atomic clock. -
Page 4: Lcd Overview
4. LCD overview 4.1 LCD overview The following illustration shows the full segments of the LCD for description purposes only and will not appear like this during normal operation. 1. DST 16. Outdoor humidity display 2. DCF Radio Controlled Time 17. -
Page 5: Weather Tendency Indicator
For example if 4hPa is selected, then there must be a fall or rise in air pressure of at least 4hPa before the Opes™ Weather Station will register this as a change in weather. -
Page 6: Setting Mode
the absolute pressure and relative pressure) - press the SET key to accept the changes and advance to the next display mode. Continue to press the SET key to toggle through the display mode until you return to the normal Mode 5.2 Setting Modes Press the SET key for 3 second while in normal mode to enter the normal Setting mode Press the SET key to select the following setting in sequence :... -
Page 7: Alarm Mode
Weather.com or Wunderground.com), and set your Opes™ Weather Station to match the official reporting station. To change the relative pressure when flashing, press the + key or MIN/MAX key to increase or decrease the relative pressure setting to match the official reporting station. -
Page 8: Min/Max Mode
b. The alarm will reactivate automatically once the value has fallen below the set value, or if a new value is entered. The outdoor weather alarm When a set outdoor weather alarm has been triggered, it will flash on the LCD display and the general outdoor alarm icon and high/low alarm icon will flash accordingly. -
Page 9: Problems And Interference With Operation
Press the SNOOZE/LIGHT key or no key for 10 seconds, the Min/Max mode will return to Normal Mode 6. Problems and interference with operation Problem & cause Remedy Poor response inaccurate readings Reduce distance between transmitters and receiver to receive signal High shielding materials between the Find a different location for sensors and/or receiver.
Need help?
Do you have a question about the OP-WS01/WH1170 and is the answer not in the manual?
Questions and answers
I have changed batteries on remote sensor. How do I link it to the station
After changing the batteries, follow these steps to link the Opes OP-WS01/WH1170 remote sensor to the base station:
1. Power up the base station. It will beep and display all LCD segments for about 3 seconds.
2. The base station will enter a learning mode to detect the sensor’s security code.
3. DO NOT press any key during the first 3 minutes of this learning period.
4. Once indoor and outdoor data appear on the display, the remote sensor is linked.
If no temperature reading appears, make sure the units are within range or re-install the batteries to repeat the process.
This answer is automatically generated