Dhcp Configuration Of Tcp/Ip In Windows Nt4 - NETGEAR WGR614 v5 Reference Manual

DHCP Configuration of TCP/IP in Windows NT4

Once you have installed the network card, you need to configure the TCP/IP environment for
Windows NT 4.0. Follow this procedure to configure TCP/IP with DHCP in Windows NT 4.0.
• Choose Settings from the Start Menu, and then select Control Panel.
This will display Control Panel window.
• Double-click the Network icon in the
Control Panel window.
The Network panel will display.
• Select the Protocols tab to continue.
Preparing Your Network
Reference Manual for the 54 Mbps Wireless Router WGR614 v5
July 2004 202-10036-01
C-15