Macos 8.6 Or 9.X; Macos X - NETGEAR RP614 Reference Manual

MacOS 8.6 or 9.x

From the Apple menu, select Control Panels, then TCP/IP.
1.
The TCP/IP Control Panel opens:
From the "Connect via" box, select your Macintosh's Ethernet interface.
2.
From the "Configure" box, select Using DHCP Server.
3.
You can leave the DHCP Client ID box empty.
Close the TCP/IP Control Panel.
4.
Repeat this for each Macintosh on your network.
5.

MacOS X

From the Apple menu, choose System Preferences, then Network.
1.
If not already selected, select Built-in Ethernet in the Configure list.
2.
If not already selected, Selct Using DHCP in the TCP/IP tab.
3.
Click Save.
4.
Preparing Your Network
Reference Manual for the Model RP614 Web Safe Router
3-7