Appendix C Preparing Your Network; What You Need To Use A Router With A Broadband Modem; Cabling And Computer Hardware; Computer Network Configuration Requirements - NETGEAR MR814 v3 Reference Manual

This appendix describes how to prepare your network to connect to the Internet through the
MR814 v3 Cable/DSL Wireless Router and how to verify the readiness of broadband Internet
service from an Internet service provider (ISP).
Note: If an ISP technician configured your computer during the installation of a
broadband modem, or if you configured it using instructions provided by your ISP, you
may need to copy the current configuration information for use in the configuration of
your firewall. Write down this information before reconfiguring your computers. Refer
to "Obtaining ISP Configuration Information for Windows
"Obtaining ISP Configuration Information for Macintosh
further information.

What You Need To Use a Router with a Broadband Modem

You need to prepare these three things before you begin:

Cabling and Computer Hardware

To use the MR814 v3 router on your network, each computer must have an 802.11g or 802.11b
wireless adapter or an installed Ethernet Network Interface Card (NIC) and an Ethernet cable. If
the computer will connect to your network using an Ethernet NIC at 100 Mbps, you must use a
Category 5 (Cat 5) cable such as the one provided with your router. For an explanation of Ethernet
cabling, see "Ethernet Cabling" on page
a standard 10 Mbps (10BASE-T) or 100 Mbps (100BASE-Tx) Ethernet interface.

Computer Network Configuration Requirements

The MR814 v3 includes a built-in web Configuration Manager. To access the configuration menus
on the MR814 v3, your must use a Java-enabled web browser program which supports HTTP
uploads such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer or
Netscape Navigator 4.0 or above.
Preparing Your Network
Preparing Your Network
B-11. The cable or DSL broadband modem must provide
202-10039-01
Appendix C
Computers" on page C-21
Computers" on page C-22
or
for
C-1