Use The On-Screen Menu System; Turn On The Vcr - RCA VR678HF User Manual

Setting Up the VCR
Startup

5. Use the on-screen menu system.

Point and Select is the method you use to move
through the menu system. There are two ways to select
(or change) a menu or feature.
• Using the MOVE Arrows: Press MENU•PROG to

6. Turn on the VCR.

A. Press VCR1 on the remote.
10
• Using the Number Buttons: Press MENU•PROG to
display the VCR MAIN MENU. Then use the
number button on the remote that corresponds to
the number on the menu to select (or change) an
item. Using the number button allows you to point
and select a menu item at the same time.
display the VCR MAIN MENU. Then use the
MOVE arrow button to point to a menu or item.
Press MENU•PROG to select (or change) the item.
Although there are two ways to access the menu
system, only the number buttons are referenced
throughout this manual to explain the VCR features
and operations.
The first time you turn on the VCR, the SETUP
menu will appear. Follow the steps on the screen to
automatically set-up the cable box or RCA DSS ®
satellite receiver, auto channel search, automatically
set the time, and select some feature options.
1. Press number button 1 on the remote to Begin
setup. Proceed to Step 7.
2. Press number button 2 on the remote to Cancel
the setup.
If you choose not to use the SETUP menu,
follow the steps in this section to manually set
up the VCR so it will operate properly.
If you skip auto channel search during setup the
auto clock set feature will not be performed.
If the SETUP menu does not appear or you prefer,
you can manually select the SETUP menu. Each of
these features (except the automatic clock set) may
also be performed individually.
To manually select the SETUP menu.
1. Press MENU•PROG to display the VCR MAIN
MENU.
2. Press 5 to display the SETUP menu.
1 2
4 5
7 8
0
or
The setup procedure
will help you configure
your VCR. Would you
like to begin the
setup procedure now?
1 Begin setup
2 Cancel
3
6
9
*
MOVE
SETUP