Enabling The Power-Saving Mode - Huawei U2800a User Manual

The PIN and the PUK are provided with your Smart card. For details,
contact your network operator.

12 Enabling the Power-saving mode

In standby mode, select Menu > Settings > Phone > Power-saving
mode to enable the power-saving mode, in which the keypad backlight
is off from 09:00 to 17:00.
13 Alarms
You can set a maximum of five alarms. To set an alarm, on the main
menu screen, select Organizer > Alarm to access the Alarm screen.
Enabling an Alarm
1. On the Alarm screen, select an alarm, and then set the alarm time,
repeat days, and alarm tone.
2. Save the settings to enable the alarm.
Disabling One or All Alarms
On the Alarm screen, select an alarm and then select Off to disable the
alarm or select Cancel all to disable all alarms.
Note
When an alarm rings, select Stop to stop the alarm. If you select

Snooze, the alarm will stop temporarily, and then ring again after
five minutes.
You can customize the days for repeating an alarm. You can browse

the seven days in a week, and then select the days that you want the
alarm to ring.
12