Haier HLC24XLP2 Service Manual page 30

Step 3: Check the F/W version and reset to default.
3.1 Press "MENU"+"1"+"9"+"9"+"9"+"ENTER" key rapidly on the Remote control to enter the factory mode (Figure
3.1).
3.2 Check the F/W version on the second row of the factory mode info (eg: the "Ver" info is V2.02). If F/W version is
incorrect, please check the version of F/W in your USB memory, else let's go to Step 3.3.
Do the following steps rapidly:
1. Press "MENU";
2. Press"1"+"9" +"9" +"9";
3. Press "ENTER"
Figure 3.1
Figure 3.2
30