Setting The Network Password - NETGEAR XE102 User Manual

XE102 Wall-Plugged Ethernet Bridge User Guide
3. Select a PowerLine device.
Note: If more than one remote device is listed, you can identify each one from its
MAC address.
4. Click Enter Password.
Figure 5
5. Enter the password from the label on the back of the selected PowerLine device, and click OK.
6. Repeat this step for all devices that you want attached to your network.

Setting the Network Password

To set the network password:
1. Click the Security tab.
Figure 6
8
v1.0, June 2007