Wireless-N Usb Adapter Led; Placing The Usb Adapter Cradle - NETGEAR RangeMax WNDA3100 User Manual

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual
In Vista, there is one more option: Enable NETGEAR Smart Wizard.
Figure 1-9
If you clear the check mark for Enable NETGEAR Smart Wizard, the NETGEAR Smart Wizard is
disabled, and you must set up the wireless adapter with Vista auto-configuration.

Wireless-N USB Adapter LED

The LED on the wireless USB adapter indicates the condition of wireless link.
Wireless-N USB Adapter
The LED color changes
depending on the type of
network connection. Amber
indicates 2.4 GHz, and blue
indicates 5 GHz.

Placing the USB Adapter Cradle

You can attach the wireless USB adapter directly to a USB port on your computer, or use the USB
cable to extend the range and obtain better wireless reception.
To use the USB cable, plastic cradle, and loop-and-hook fastener for better USB adapter placement
on a computer monitor:
LED Meaning
Off • The wireless USB adapter in not plugged in to the USB port.
• The wireless USB adapter is in power save mode (default
from power up or reset).
Slow • Alternating amber and blue. The wireless USB adapter is
blinking scanning for a network.
• Amber. The wireless USB adapter is connecting to a
network at 2.4 GHz.
• Blue. The wireless USB adapter is connecting to a network
at 5 GHz.
Blinking The wireless USB adapter is connected to a wireless network,
and is sending or receiving data.
Solid The wireless USB adapter isconnected to a wireless network,
but it is not sending or receiving data.
v1.0, December 2007
1-11