NETGEAR WG511v2 User Manual page 44

User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2
2. Click the Networks tab.
Figure 4-12
Buttons
At the bottom of the screen are the following buttons:
• Help: Display online help.
• Find a Network: Use the wizard to help you connect to a network. See
on page 4-2.
• Connect: Connect to the network that you selected.
• Scan: Check for wireless networks in your area.
• Close: Close the window for the Wizard.
The screen also shows the following information for each network scanned:
• Network Name (SSID): The name assigned to a wireless network. This is the same as the
SSID or ESSID configuration parameter. Note that as a security measure, some wireless
access points do not broadcast their SSID. In such cases, the SSID field will be blank even
though the rest of the information will still be displayed.
• Channel: The channel determines which operating frequency will be used.
• Security: Identifies whether the wireless network uses WEP or WPA-PSK security settings.
• Signal: Identifies the signal strength of the communications.
4-16 Network Connections and Wireless Security
v2.2, December 2005
"Finding a Network"