NETGEAR WG121 User Manual page 33

Install the NETGEAR 54 Mbps Wireless
USB 2.0 Adapter WG121.
Locate an available USB port on your
a.
PC. Connect the USB cable to the
WG121 and insert the other end of the
cable into the USB slot on your PC.
After a short delay, the Found New
Hardware Wizard displays.
Note: Click Yes if you are prompted
with a Digital Signature Not Found
message.
Click Finish when done, and if
b.
prompted restart your computer.
You will see the WG121 system tray
a.
icon on the lower right portion of the
Windows task bar.
Basic Setup
User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG121
Found New Hardware Wizard
Note: If your computer does not have a USB v2.0
port but rather a USB v1.1 type port, the WG121 will
be limited to the maximum speed of the USB v1.1
port. USB v1.1 port maximum speed is 14 Mbps
whereas the maximum speed of a USB v2.0 port is
480 Mbps.
WG121 System Tray Icon
3-9