Taking Pictures - Panasonic DMW-MCTZ40 Operating Instructions Manual

∫ Attaching the weights
About using the weights
Attach the weights to adjust to the preferred buoyancy when using the marine
case. Use them as necessary.
Refer to the following about buoyancy underwater.
1 If you use the digital camera and the marine case only:
They will float slowly in fresh water or seawater. (Plus buoyancy)
2 If you use the digital camera, the marine case and 1 weight:
They will float even more slowly in fresh water or seawater than 1. (Plus
buoyancy)
3 If you use the digital camera, the marine case and 2 weights:
They will sink slowly in fresh water or seawater. (Minus buoyancy)
How to attach the weights
If you use 1 weight, align the protruding part of
the weight with the tripod receptacle on the
marine case and then using a slotted
screwdriver or similar, use the supplied
weights attachment screw to attach to the
tripod receptacle.
If you use 2 weights, align the projecting part
of the second weight with the indented part of
the first weight so that the weights do not
overlap and then attach them to the tripod receptacle.

Taking Pictures

∫ Be sure to check the following before entering the water
Check the following before diving.
•
Is there sufficient remaining battery power?
•
Is there sufficient memory in the card?
•
Is the O-ring fitted evenly into the O-ring groove?
•
Have you checked that no water leaks into the Case?
•
Is the buckle closed firmly?
∫ Taking pictures
1
Turn the camera on.
2
Display the scene mode menu and then set [Underwater].
16
VQT4V81 (ENG)