Federal Communications Commission Statement This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Warnings and Precautions Warnings and Precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference.
Page 4
Warnings and Precautions ▪ Use and handle the power cord with care. Do not place any heavy objects on the AC power cord. ▪ Do not pull the AC power cord. Do not handle the AC power cord with a wet hand. ▪...
Warnings and Precautions Outdoor Antenna Safety Instructions If an outdoor antenna is connected, follow the precautions below: ▪ An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits. ▪...
TABLE OF CONTENTS Federal Communications Commission Statement ......1 Warnings and Precautions Important Safety Instructions ..................2 Antenna Safety Instructions..................4 Chapter 1 Introducing the LCD TV Key Features ....................... 6 Package Contents ....................... 7 Setting Your LCD TV....................8 Your LCD TV.......................11 Your Remote Control ....................
Chapter Introducing the LCD TV Chapter 1 Introducing the LCD TV Key Features Various Audio/Video terminals for external equipment connection ▪ 2 set of composite A/V input terminals ▪ 1 set of S-VIDEO terminals ▪ 2 set of component Video input terminals ▪...
Chapter Introducing the LCD TV Package Contents Make sure all of the following contents are included. LCD TV Bottom Stand / Screw Driver and 6 Screws Remote Control/ VIDEO Cable AAA Batteries x 2 Power Cord ...
Chapter Introducing the LCD TV Setting Up Your LCD TV How to install the TV Stand Follow the instructions below to install the TV stand: Open the box, and make sure all necessary parts are in the box. The package contains: Screw Driver Stand...
Page 10
Chapter Introducing the LCD TV H old the TV stand and place it on the six screw holes on the back of the unit as shown. Use the screwdriver to tighten the six screws on the rear of the until the screw is firmly fixed in place.
Page 11
Chapter Introducing the LCD TV Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal (refer to page17). Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. ...
Chapter Introducing the LCD TV Your LCD TV Front/Right Side View and Controls The LED light indicates when the LCD TV is activated. Infrared Receiver VOLUME ▲▼ VIDEO IN Adjusts the volume up and down. Connects to the composite Selects the main-menu item and change Video and Audio output jacks VIDEO...
Page 13
Chapter Introducing the LCD TV Rear View and Jacks VIDEO IN Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment. HDMI IN Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced, high-definition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for DVI connection.
Chapter Introducing the LCD TV Your Remote Control Turns the LCD TV on and off POWER SWAP No function P.MODE Selects picture mode: Vivid/Standard/ POWER Cinema/Sport/User P.MODE SWAP No function S.MODE MUTE Cycles through the multi-channels TV sound(MTS) options: SAP/MONO/ CAPTION SLEEP P.SIZE...
Page 15
Chapter Installing the LCD TV GUIDE In HDTV mode, pressing GUIDE displays the Program Guide on the screen EXIT Exits the OSD menu POWER ▲▼►◄ Cycles through OSD options and selects individual menu items. OK P.MODE SWAP confirms option settings INFO Pressing once displays a variety of S.MODE...
Chapter Installing the LCD TV Chapter 2 Installing the LCD TV Refer to the owner’s manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting a TV Cable or an Antenna Antenna Connection The antenna requirements for good color TV reception are more important than those for a black &...
Page 17
Chapter Installing the LCD TV Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. B: Shows how to use a separate VHF and/or UHF outdoor antenna. A.
Page 18
Chapter Installing the LCD TV Cable TV (CATV) Connection This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible.
Page 19
Chapter Installing the LCD TV METHOD A: Use a supplied antenna cable to connect the NTSC signal to the LCD TV’s TV CABLE terminal. HDTV CABLE VHF/UHF IN METHOD B: Use a supplied antenna cable to connect the ATSC signal to the LCD TV’s HDTV AIR terminal.
Chapter Installing the LCD TV Connecting a VCR Rear of TV HDMI IN VGA IN AUDIO OUT YPbPr IN DIGITAL STEREO AUDIO AUDIO AUDIO OPTICAL HDTV CABLE COAXIAL AUDIO VHF/UHF IN VIDEO AUDIO S-VIDEO AUDIO YPbPr IN S-VIDEO IN VIDEO IN AUDIO Cable S-VIDEO Cable...
Chapter 2 Installing the LCD TV Connecting a Video Camera or Game Console Rear of TV Right Side HDMI IN VGA IN AUDIO OUT VIDEO YPbPr1 IN DIGITAL STEREO AUDIO AUDIO AUDIO OPTICAL HDTV CABLE AUDIO COAXIAL AUDIO VIDEO1 IN VHF/UHF IN VIDEO AUDIO...
Chapter Installing the LCD TV Connecting a DVD Player Rear of TV HDMI IN VGA IN AUDIO OUT YPbPr IN DIGITAL STEREO AUDIO AUDIO AUDIO OPTICAL HDTV CABLE COAXIAL AUDIO VHF/UHF IN VIDEO AUDIO S-VIDEO AUDIO YPbPr IN VIDEO IN S-VIDEO IN COMPONENT/AUDIO Cable AUDIO Cable...
Page 23
Chapter Installing the LCD TV Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. Press the button on the remote to turn on the LCD TV. To watch a DVD, press the Source button on the remote to select VIDEO( METHOD A), or VIDEO ( METHOD B), or VIDEO/VIDEO (METHOD C).
Chapter Installing the LCD TV Connecting a Digital TV Cable Box or Digital Satellite Receiver Rear of TV HDMI IN VGA IN AUDIO OUT YPbPr IN DIGITAL STEREO AUDIO AUDIO AUDIO OPTICAL HDTV CABLE COAXIAL AUDIO VHF/UHF IN VIDEO AUDIO S-VIDEO AUDIO...
Chapter Installing the LCD TV Connecting an AV Equipment with HDMI Connector Rear of TV HDMI IN VGA IN AUDIO OUT YPbPr IN DIGITAL STEREO AUDIO AUDIO AUDIO OPTICAL HDTV CABLE COAXIAL AUDIO VHF/UHF IN VIDEO AUDIO S-VIDEO AUDIO YPbPr IN S-VIDEO IN VIDEO IN...
Chapter Installing the LCD TV Connecting an AV Equipment with DVI Connector Rear of TV HDMI IN VGA IN AUDIO OUT YPbPr IN DIGITAL STEREO AUDIO AUDIO AUDIO OPTICAL HDTV CABLE COAXIAL AUDIO VHF/UHF IN VIDEO AUDIO S-VIDEO AUDIO YPbPr IN S-VIDEO IN VIDEO IN...
Chapter Using the LCD TV Connecting a PC Rear of TV HDMI IN VGA IN AUDIO OUT YPbPr IN DIGITAL STEREO AUDIO AUDIO AUDIO OPTICAL HDTV CABLE COAXIAL AUDIO VHF/UHF IN VIDEO AUDIO S-VIDEO AUDIO YPbPr IN S-VIDEO IN VIDEO IN AUDIO Cable VGA Cable...
Chapter Using the LCD TV Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System For better sound quality, you may want to play the LCD TV audio through your stereo system. HDMI IN VGA IN AUDIO OUT YPbPr IN DIGITAL STEREO...
Chapter Using the LCD TV Wide Screen Viewing Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through the following wide screen settings. Press the P.SIZE button repeatedly to select the screen format you want. ...
Chapter Using the LCD TV Operating the Menu Press the button to turn the LCD TV on. Press the MENU button on the remote control, the on-screen menu will appear on the screen. Use the ◄► buttons to select your main menu option. VIDEO MENU: Allows you to make adjustments to your picture settings.
Page 31
Chapter Using the LCD TV SETUP MENU: Allows you to set up a variety of features: Language, Closed Caption, factory reset, V-Chip, Parental Control, sleep timer. ▪ If the signal source is VIDEO/S-VIDEO, the Setup ▪ If the signal source is TV/HDTV, the Setup menu menu appears as: appears as: Closed Caption...
Chapter Using the LCD TV Setting up the HDTV Function Automatically scans and stores all the TV channels With the LCD TV connected to a television programming source, press the SOURCE button on the remote to display the Source List. Use the ▲▼ buttons to select HDTV, and press the OK button.
Page 33
Chapter Using the LCD TV The HDTV menu includes the following options: ◄ ► Audio Language English Time Zone Eastern Time SPDIF Type Manual Scan Channel Skip Channel Block Caption HDTV (CABLE/AIR) Select Exit Allows selection of the audio languages: Audio Language English/Spanish/French Allows selection of time zones in the USA: Eastern Time/Indiana/Central...
Page 34
Chapter Using the LCD TV Allows to set closed caption Caption Analog Closed Caption ◄ ► Digital Closed Caption Caption Style HDTV (CABLE/AIR) Select Back ▪ Analog Closed Caption: ◄► buttons Press the to select the basic analog closed caption options: OFF/CC1/CC2/CC3 CC4 Note: The setting here will be applied to each DTV channel ▪...
Page 35
Chapter Using the LCD TV Using the Program Guide The Program Guide feature brings all sorts of information to your screen, such as program title, program duration, time remaining, rating information, closed caption, availability, etc. With the LCD TV connected to a television programming source, press the TV button on the remote control.
Chapter Using the LCD TV Customizing the VIDEO Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the VIDEO. ...
Page 37
Chapter Using the LCD TV Press the OK button to enter the Display adjustment setting: Display adjustment H Position V Position Video Select Exit ▪ H Position Adjusts the position of the picture left and right in the window ▪...
Chapter Using the LCD TV Customizing the AUDIO Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the AUDIO. ...
Chapter Using the LCD TV Customizing the SETUP Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the SETUP. ...
Page 40
Chapter Using the LCD TV Allows to select from 4 closed caption modes: Closed Caption ▪ CC /CC /CC /CC: Display a printed version of the dialog and sound effects of the program being viewed ▪ T/T: Disgame console information presented using either half or the whole screen ▪...
Chapter Using the LCD TV Using the V-CHIP (For US market only) Settings The US has 2 rating system for viewing content: Movie blocking(MPAA) and TV Blocking. The TV Blocking conjuncts with the V-CHIP to help parents block inappropriate programs from their children.
Page 42
Chapter Using the LCD TV TV GUIDELINE has 2 rating methods: Content-Based Rating and Age-Based Rating. TV GUIDELINE includes the following options: AGE-BASED CONTENT-BASED RATING DESCRIPTION RATING DESCRIPTION All children Fantasy violence TV-Y Directed to children age 7 and older TV-Y Suggestive dialogue General Audience...
Chapter Using the LCD TV Using the Parental Settings The Parental blocking can be set up to the TV to block a Channel or a Video Source. Use the function, must enter a four-digit password. The factory password is V-CHIP 0000.
Chapter Using the LCD TV Customizing the TV Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the TV. ...
Troubleshooting TROUBLESHOOTING Before consulting service personnel, check the following chart for a possible cause of the trouble and for a possible solution. TV will not turn on Make sure the power cord is plugged in, then press the button on the remote. ...
Specifications Specifications DISPLAY MODE The screen image has been optimized during manufacture for the display modes listed below. If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system does not equal the standard signal mode, adjusting screen resolution by referring to your videocard user guide otherwise there may be no display.
Page 48
Specifications MODEL EF-371 LCD Panel Panel Size 37’’ TFT LCD Brightness Contrast Ratio 1000:1 Max. Resolution 1366x768 Input Connector VIDEO/AUDIO(L/R) S-VIDEO/AUDIO(L/R) YPbPr/AUDIO(L/R) VGA/AUDIO(L/R) HDMI/AUDIO(L/R) AUDIO OUT(L/R) OPTICAL/COAXIAL HEADPHONE Power Source AC100~240V, 50/60HZ, 3.0A Power Consumption 275 W, standby < 5 W Dimension 36.6 w x 28.1 h x 10.4 d inch WEIGHT...
Need help?
Do you have a question about the ma-32ef1ac and is the answer not in the manual?
Questions and answers