Func. Setting; Super Energy Saving - LG 24MB56HQ Owner's Manual

FUNC. Setting

SUPER ENERGY SAVING

1
Press FUNC. button on the rear of the Monitor set to
display the FUNC. OSD.
2
Enter to SUPER ENERGY SAVING by pressing the ▼
button.
3
Set the options by pressing the ◄ or ► or ▼buttons.
4
Select EXIT to leave the OSD menu.To return to the
upper menu or set other menu items, use the up arrow
( ) button.
Each option is explained below.
SUPER ENERGY SAVING
High
Low
Off
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
y
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
y
SAVING DATA(W/h)
y
SUPER SAVING(High)
SUPER SAVING(Low)
Saving Data depends on the Panel. So,those values should be different from each panel and panel
y
vendor.If option of SUPER ENERGY SAVING is High or Low, monitor luminance become higher or
lower depend on source.
LG calculated these values by using "broadcast video signal"
y
(including broadcast video: IEC 62087)
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
y
function.
If option of SUPER ENERGY SAVING is High or Low, Picture Mode will automatically be Custom and
y
Reader Mode will automatically be Reader Off.
Enables SUPER ENERGY SAVING you can save energy with this energy- high efficient function.
Enables SUPER ENERGY SAVING you can save energy with this energy- low efficient function.
Disables SUPER ENERGY SAVING.
604 mm
(23.8 inch)
5 W/h
2 W/h
CUSTOMIZING SETTINGS
Description
21