Panasonic CF-LX3 series Operating Instructions Manual page 17

6 Setup Windows.
A Select language and click [Next].
A Turn on the computer.
Follow the on-screen instructions.
l The computer restarts several times. Do not touch the key-
board or touch pad, and wait until the drive indicator
turned off.
l After the computer is turned on, the screen remains black or
unchanged for a while, but this is not a malfunction. Wait for
a moment until the Windows setup screen appears.
l During setup of Windows, use the touch pad and clicking to
move the cursor and to click an item.
l Setup of Windows will take approximately
5 minutes /
Go to the next step, confirming each message on the display.
Follow the steps below.
l
A When "Enable sensors" is displayed, click [Enable this
sensor].
B When the [User Account Control] screen is displayed, click
[Yes].
The computer restarts automatically, and the setting is en-
abled.
l You can set the Wireless Network after the setup of Windows
is complete.
If "Get online" is displayed, select "Skip this
step".
"Join a wireless network" screen may not appear.
Verify the time zone, date and time (è page 33).
l
CAUTION
l Wait until the drive indicator
l You can change the user name, password, image and security
setting after setup of Windows.
l Remember your password. If you forget the password, you can-
not use the Windows.
Creating a password reset disk beforehand is recommended.
l Do not use the following words and characters for user name:
CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to
LPT9, @, &, space. In particular, if you create a user name (ac-
count name) that includes the "@" mark, a password will be re-
quested at the log-on screen, even if no password has been set.
If you try to log on without entering a password, "The user name
or password is incorrect." may be displayed and you will not be
able to
page 35).
l Use standard characters as a computer name: numbers 0
through 9, uppercase and lowercase letters from A to Z, and the
hyphen (-) character. If the error message "The computer name
is not valid" appears, check if characters other than the above
are not entered. If the error message still remains on the display,
set the key entry mode to English ("EN") and enter characters.
20 minutes.
has turned off.
sign in / log on to Windows (è
has
17