Philips QC5560 User Manual page 7

- The swivel head allows you to hold and use the appliance like a
styling comb.
5 Push the on/off slide upwards to switch on the appliance.
6 Move the clipper through the hair slowly.
7 Regularly remove cut hair from the comb attachment.
If a lot of hair has accumulated in the comb attachment, remove the comb
attachment from the appliance and blow and/or shake the hair out of it.
When you remove the comb attachment, the selected setting does not
change.
Tips
- We advise you to start clipping at the highest setting of the comb
attachment and to reduce the setting gradually.
- To clip most effectively, move the appliance against the hair growth
direction.
- Since all hair does not grow in the same direction, you need to move
the appliance in different directions (upwards, downwards and across).
- Make sure that the flat part of the comb attachment is always fully in
contact with the scalp to obtain an even result
- Write down the settings you use to create a certain hairstyle as a
reminder for future clipping sessions.
Contouring without comb attachment
You can use the appliance without comb attachment to clip your hair very
close to the skin (0.5mm) or to contour the neckline and the area around
the ears.
Be careful when you clip without comb attachment because the cutting
element removes every hair it touches.
1 Pull the comb attachment off the swivel head.
Never pull at the flexible top of the comb attachment. Always pull at the
bottom part.
2 Comb the hair ends over the ears before you start to contour the
hairline.
3 Push the on/off slide upwards to switch on the appliance.
4 When you shape the contours around the ears, tilt the appliance in
such a way that only one edge of the cutting element touches the
hair ends.
ENGLISH
7