Advertisement
Quick Links
SA
SOUND ADVANCE
SOUND ADVANCE SYSTEMS
MODEL:
MOUNTING LOCATIONS:
SUPPLIED ACCESSORIES:
REQUIRED ACCESSORIES:
TECHNICAL SPECIFICATIONS
DIMENSIONS
Unless otherwise specified all dimensions are in
inches (mm)
WEIGHT
BT82, BT82i 14.2 lbs. (6.42 kg.); BT82T8, BT82iT8
14.9 lbs ( 6.79 kg.); BT82T32, BT82iT32 15.5 lbs. (7.05
kg.).
25.12 [638]
4.50 [114]
16.12 [409]
fig. 1
BT82
R
BT82, BT82i, BT82T8, BT82iT8, BT82T32, BT82iT32
Truss, Joist, Beam, Pole, Column, Wall Mount or Pendant Hang.
Neutrik Speakon® NL4CFC S.A.S p# 211.002
EBLT-M, BKT-L, STND-U
5/15 18TPI
8 PLCS.
www.video-car.it
INSTALLATION INSTRUCTIONS
BT82 Loudspeaker
with Accessories
MODELS
BT82 - 8 ohms, Dual Driver Outdoor Speaker
BT82T8 - Dual Driver Outdoor Speaker W/8 Watt
Transformer
BT82T32 - Dual Driver Outdoor Speaker W/32
Watt Transformer
BT82i - 8 ohms, Dual Driver Indoor Speaker
BT82iT8 - Dual Driver Indoor Speaker W/8 Watt
Transformer
BT82iT32 - Dual Driver Indoor Speaker W/32
Watt Transformer
RECOMMENDED MOUNTING LOCATIONS
SOUND ADVANCE products provide outstanding
performance and economic advantages when installed
in environments with an ambient noise level at or below
75dBA, where the speakers can be placed between 8
and 18 feet above the floor, and which are large enough
to accommodate at least 4 or more conventional
loudspeakers. When system design requirements
indicate speaker to speaker distances of greater than
40.0 ft., please contact the factory for additional techni-
cal information on such applications.
Truss, Joist, Beam, Pole, Column, Wall Mount or
Pendant Hang Using Optional Accessories
RECOMMENDED ENVIRONMENTS
Outdoor - BT82 Series (black finish only)
Indoor - BT82i Series (black or white finish)
FACTORY PROVIDED FINISH
BT82 Series, black finish only
BT82i Series, black or white finish
Advertisement
Related Manuals for SA BT82
Summary of Contents for SA BT82
-
Page 1: Installation Instructions
Neutrik Speakon® NL4CFC S.A.S p# 211.002 REQUIRED ACCESSORIES: EBLT-M, BKT-L, STND-U TECHNICAL SPECIFICATIONS MODELS BT82 - 8 ohms, Dual Driver Outdoor Speaker BT82T8 - Dual Driver Outdoor Speaker W/8 Watt DIMENSIONS Transformer BT82T32 - Dual Driver Outdoor Speaker W/32 Unless otherwise specified all dimensions are in... - Page 2 “L” brackets with hardware. IMPORTANT NOTE: The proper orientation for any Weight 1.4 lbs. (0.64 kg.) BT82 series product is perpendicular to the floor and wall of the area in question. For any other orientation please consult with the factory before 5.20 [132]...
- Page 3 IMPORTANT NOTE: Up to four (4) BT82 loudspeaker systems may be combined in a series / parallel wiring configuration while maintaining the nominal WIRING 8 Ohm load.
- Page 4 If you are using BT82T8 Outdoor Series loud- fig. 3 speakers fitted with a 70.7V or 100V 8 watt transformer. The -2 pin should be connected to Common or Ground lead. To use the 8 watt tap connect the +1 pin to the Plus lead.