Light Systems; Bicycle Helmet And Clothing; Replacement Of Defective Or Bent Parts - Scott Kids bike Owner's Manual

Hide thumbs Also See for Kids bike:
Table of Contents

Advertisement

CALIPER BRAKE
Release counter nut A and turn adjustment screw B counter clockwise until the
distance between brake pads and rims is approx 2mm on each side Tighten
counter nut A
‑ In case adjustment screw B is released already to the limit, please release cable
clamping screw C and turn adjustment screw clockwise to its original position
‑ Close the caliper brake with your hand to the rim , adjust the brake cable and
tighten clamping screw C Please note the table of tightening torques at the end of
this file
‑ Finally make the fine tuning with adjustment screw B as mentioned above The
wheel needs to spin free without touching the brake pads Fix counter nut A
IMPORTANT!
Make sure that the brake works perfectly
IMPORTANT!
Under wet conditions the brake performance can decrease which will result in a
prolongation of the braking distance

LIGHT SYSTEMS

‑ light the front and rear lights by the beginning of the dusk To switch on the
dynamo press with the thumb on the button But never while riding! To check the
function of front and rear light turn the raised front wheel
‑ Under wet conditions the effectiveness of the dynamo may decrease
08
KIDS | BIKE OWNER'S MANUAL 2015
B
A
C

BICYCLE HELMET AND CLOTHING

‑ Please take care that your child wears clothing with bright colors and, if possible,
with reflective stripes or fabrics
‑ A helmet that fits is the best way to avoid head injuries The helmet should meet
DIN EN 1078 and should have the CE label By choosing bright colors it will help
to improve the visibility Wearing such a helmet should be matter of course for all
cyclists In addition consider to be a good example for children

REPLACEMENT OF DEFECTIVE OR BENT PARTS

In case the bike is damaged by a crash or accident, please replace all damaged parts
immediately at your local SCOTT dealer Never try to repair bent parts, they might
fail and cause an accident!
BEFORE RIDING
In the beginning the seat height should be adjusted in that way that your child, when
sitting on the saddle, can reach the ground with both feet When more experienced
the saddle can be raised up into perfect riding position
IMPORTANT!
Never exceed the seatpost and stem over the marked area Otherwise the
connection can get loosen and can cause in worst case a crash
Please check that your child can reach easily the handle bar and use brake‑ and
shifting levers as well as the bell
BEFORE EVERY RIDE
The traffic laws demand that one checks all functions that concern safety Check
every brake when starting to ride Also check the function of front and rear light and
check the air pressure of the tyres
BIKE OWNER'S MANUAL 2015 |
09
KIDS

Advertisement

Table of Contents
loading

Related Products for Scott Kids bike

Table of Contents