Bucking; Pruning - ALDI 50712 37CC User Manual

37cc Petrol Chainsaw
Bucking (Fig AF)
Bucking is cutting a log into lengths for easier
handling.
To saw a log lying on the ground, first saw
halfway, then roll the log over and cut from the
opposite side. To saw the end of a log supported
off the ground, first saw up from the bottom
one-third through the log then finish by sawing
down from the top. To saw a log in the middle of
two supports holding it off the ground, first saw
down from the top one-third through the log
then finish by sawing up from the bottom.
CAUTION: Avoid cutting into the ground as
this will very quickly dull the saw chain.
Pruning (Fig AG)
Pruning is the removal of a limb or branch from a
standing tree.
WARNINGS: Do not use an unstable
foothold or ladder. Do not overreach.
Do not saw above shoulder height. Always use both hands to hold the
chainsaw. First cut up from the bottom and finish down from the top.
AFTER SALES SUPPORT
1800 909 909
(toll free)
AF.
AG.
e-mail: help@powertoolsupport.com
MODEL: №. 50712 • 11/2015 • WLCS38A-375
2 1
Operation
1
1 2
2 1
2
2
1
1
2
2
1
27