Giantec VPC3000 Series Installation Manual

Vpc3000 series compact size vehicle pc
Hide thumbs Also See for VPC3000 Series:

Advertisement

Quick Links

VPC3000 Series
Compact Size
Vehicle PC
Installation Manual
Installation Manual
2
Edition, 2007
nd
Copyright
This document is copyrighted, © 2007, and all rights are reserved.
manufacturer reserves the right to make improvements to the products described in this
manual at any time without notice. No part of this manual may be reproduced, copied,
translated or transmitted in any form or by any means without the prior written permission
of the original manufacturer. Information provided in this manual is intended to be
accurate and reliable. However, the original manufacturer assumes no responsibility for
its use, nor for any infringements upon the rights of third parties that may result from such
use.
Copyright © 2007 by Giantec Inc.
All right Reserved
December 2007, Version A.1
Acknowledgments
Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines
Corporation.
Intel, Pentium, Celeron, and MMX are registered trademarks of Intel Corporation.
®
Microsoft Windows
is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
All other product names or trademarks are properties of their respective owners.
For more information, technical support and service about this VPC3000 Vehicle PC,
please contact your supplier where you have purchased from.
nd
This manual is for VPC3000 series (2
Edition, 2007)
VPC3000 Series Vehicle PC Installation Manual ver.A.1
The original
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VPC3000 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Giantec VPC3000 Series

  • Page 1 For more information, technical support and service about this VPC3000 Vehicle PC, Installation Manual please contact your supplier where you have purchased from. Edition, 2007 This manual is for VPC3000 series (2 Edition, 2007) VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 2 Liquid has penetrated into the equipment. accident, abuse, misuse, negligence and acts of God. The equipment has obvious sign of breakage. VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 3: Table Of Contents

    A complete description of the problem PC Health Status................50 Frequency/Voltage Control ............... 52 The exact wording of any error messages Appendix A Pin Assignment ............... 53 VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 4: Chapter 1 Introduction

    Compact Storage Device 1.2.3. • Quick Accessibility The VPC3000 series Vehicle PC is the ideal application ready PC platform system for all • Easy Maintenance vehicle solution. This brings you with huge convenience and great mobile connectivity for most the common vehicle on today’s road. All electronics inside the VPC3000 are protected in a robust, compact sealed housing for embedding into a larger housing or as 1.2.4.
  • Page 5: Chapter 2 Hardware Functional Specification

    Chipset integrated VGA controller • Shared system memory up to 64MB • Up to 1600 x 1200 @ 85Hz 5. Storage • 2.5” internal HDD VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 6 Net weight is at 1.5 Kg Dimension: • Width: 114 mm ( 4.49 inch) x High: 50mm (1.97 inch) x Depth: 196 mm ( 6.65 inch) VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 7: External I/O Connector

    The VPC 3000 series provide all major audio signals and it can be optional with Line-in/Line-out/Speaker-out function. This is part of hardware specification for on board audio line out. VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 8: Chapter 3 Chipset Software Installation Utility

    The device drivers for the VPC3000 series board are located in the software installation CD. The driver CD will guide and link you to the utilities and device drivers under a Windows system.
  • Page 9: Introduction

    The windows illustrations in this chapter are intended as examples only. Please follow the listed steps, and pay attention to the instructions which appear on your screen. VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 10 Click “Next” when you see the following message. 3.3.6 Step 6 Installation is in progress. 3.3.4 Step 4 Click “Yes” when you see the following message. VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 11: Chapter 4 Vga Setup

    The graphics controller can deliver to the display with resolutions up to 1600 x 1200@85-Hz. 4.1.1 CMOS setting for panel type The VPC3000 series system BIOS and the custom drivers are located within a 512kbytes, Flash ROM device. This flash chip holds the system and VGA BIOS together.
  • Page 12: Installation Of The Vga Driver

    Please read the instructions in this chapter carefully before you attempt installation. 4.3.1 Step 1 Insert the driver CD into system’s CD-ROM drive. Then click the “VGA The VGA drivers for the VPC3000 series are located on the driver CD. Run the Driver” icon to start installation.
  • Page 13 4.3.5 Step 5 Click “Yes” when you see the following message. 4.3.4. Step 4 Click "next" when you see the following message. 4.3.6 Step 6 Installation continues. VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 14: Further Information

    When the following message appears, click “Finish” to complete the installation and restart Windows. For further information about the AGP/VGA installation in your VPC3000 series, including driver updates, troubleshooting guides and FAQ lists, contact your supplier where you have purchased from or visit the following web resources: Intel website: www.intel.com...
  • Page 15: Chapter 5 Audio Setup

    5.2 Driver Installation Please read the instructions in this chapter carefully before you attempt installation. The audio drivers for the VPC3000 series are located on the driver CD. Run the supplied SETUP program to install the drivers, don’t copy the files manually.
  • Page 16 Step 6 Click “Continue Anyway” when you see the following message When the following message appears, click “Finish” to complete the installation and restart Window VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 17: Further Information

    5.4 Further Information Award’s BIOS ROM has a built-in setup program that allows users to modify the basic For further information about the audio installation in your VPC3000 series, including driver updates, troubleshooting guides and FAQ lists, contact your supplier where you system configuration.
  • Page 18: Entering Setup

    Press “ESC” to allow you to return back to BIOS Initial Setup Screen. Figure 6.1.2: Award BIOS Initial Setup Screen Figure 6.2.2: Standard CMOS features screen VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 19 APIC Mode APIC stands for Advanced Programmable Interrupt Controller. The default setting is Enabled. Figure 6.2.4 Advanced BIOS features screen 6.2.2.1 Quick Power On Self Test VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 20: Advanced Chipset Features

    The default setting for the Active to Precharge Delay is 3. 6.3.6 On-Chip VGA The default setting is enabled. 6.3.7 On-Chip Frame Buffer Size Figure 6.3.2: Advanced Chipset Features The default setting is 32MB. VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 21: Ide Master/Slave Pio/Udma Mode

    If you enable IDE HDD Block Mode, the enhanced IDE driver will be enabled. Leave IDE HDD Block Mode on the default setting. Figure 6.4.2 on Chip IDE Device VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 22: Power Management Setup

    Select enabled if your system contains a Universal Serial Bus 2.0 (USB 2.0) controller and you have USB peripherals. default setting is enabled. Figure 6.5.2: Power Management Setup VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 23: Pnp/Pci Configurations

    Choosing “Auto” automatically configures all the boot and Plug /Play devices but you must be using Windows 95 or above. 6.6.2 IRQ Resources This is left at “Disabled.” Figure 6.6.2: PnP / PCI Configurations VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 24: Pc Health Status

    6.7.2 CPU Warning Temperature 6.8.2 Spread Spectrum Enable warning monitoring and warning by buzzer when temperature is been defined. Enable spread spectrum clock modulation to reduce EMI. VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...
  • Page 25: Appendix A Pin Assignment

    +12V ACC power, ACC HOLD, Power Button, Power LED, ACC HOLD LED, USB x 1, VGA, Line out. B USB x 3, MIC In, Line In. VPC3000 Series Vehicle PC Installation Manual ver A.1 VPC3000 Series Vehicle PC Installation Manual ver.A.1...

Table of Contents