RADIO FREQUENCY REMOTE CONTROL DOOR LOCKING
1
2
The plip remote control 1 locks and
unlocks the doors.
It is supplied with power by a
battery which must be replaced
when the battery indicator light 2
no longer illuminates. (Refer to the
information on the plip remote
control batteries in section 5.
Locking/unlocking the doors
Press the plip remote control for
approximately one second to lock or
unlock the doors. (Light 2 will
illuminate.)
- The
hazard
lights
repeaters flash twice to indicate
locking.
Note: If an opening (door or boot
lid)
is
incorrectly
closed
remains open or if a rear light has
remained
in
the
"continuous
lighting" position (see "interior
lights" paragraph in section 3), the
hazard lights will not flash.
- The
hazard
lights
repeaters flash once to indicate
unlocking.
The range within which the
remote control will operate
This
varies
environment: therefore take care
when handling the remote control
that you do not inadvertently lock
and
side
or unlock the doors.
Note: On certain vehicles, if a door
is not opened within approximately
or
30 seconds of unlocking the door
using the remote control, the doors
will lock again automatically.
and
side
according
to
the
1.03