Casio celviano ap-700 User Manual page 43

Configuring Digital Piano Settings
Display Text
Metronome >Ent
Tempo
Beat
Volume
General >Ent
LCD Contrast
Auto Resume
Auto Power Off
Operation Lock
Half Pedal Pos.
Headphone Mode
Volume Sync EQ
Factory Reset >Ent
EN-42
Description
Metronome function parameters
• The editing screen can also be displayed by holding down the 8METRONOME button.
Metronome tempo
Metronome beat
• This setting cannot be changed while playback of a
Music Library song is in progress.
Metronome volume level
Other Digital Piano parameters
Digital Piano display contrast
Digital Piano setup backup. When this setting is
enabled, the Digital Piano remembers its current
settings when it is turned off, and restores them the
next time power is turned on.
• The settings below are not remembered.
Song part (LR) selection, Operation lock, Local
Control, Concert Play song mode (LISTEN, PLAY),
Concert Play song tempo
Auto Power Off
Operation lock.
Half pedal position
Headphone mode. The Headphone Mode
automatically performs timbre compensation while
headphones are being used to reproduce the natural
expanse of sound that reaches the ears when an
acoustic piano is played. The initial default setting is
"On".
• On: Enabled; Off: Disabled
Volume sync equalizer. Automatically performs
timbre compensation in accordance with the volume
level. This feature ensures that low range and/or
high range sounds are easier to hear, even at low
volume levels. The initial default setting is "Normal".
• Off: Compensation disabled;
Weak: Weak compensation;
Normal: Normal compensation;
Strong: Strong compensation
• This function is intended for use with sound
output by the Digital Piano's speakers.
• When outputting from the Digital Piano's LINE
OUT R and/or L/MONO terminal, you can switch
to a timbre suitable for line out. To do so, plug
headphones into the Digital Piano's PHONES jack,
and then disable both the Headphone Mode and
Volume Sync Equalizer.
Return system to initial factory defaults.
Go here for more
Settings
information
(See the page Using the Metronome (page
to the right.) EN-19)
(See the page Adjusting Display Contrast
to the right.) (page EN-7)
Off –
(Disabled),
On
(Enabled)
(See the page Auto Power Off (page EN-6)
to the right.)
Operation Lock (page EN-7)
To adjust the half pedal
trigger position (page EN-11)
Off –
(Disabled),
On
(Enabled)
Off –
(Disabled),
Weak,
Normal,
Strong
– Returning the Digital Piano to
Its Factory Default Settings
(page EN-7)