Section 1 - Product Overview
1
Status LED
2
WPS Button
3
Reset Button
D-Link DCH-S220 User Manual
Hardware Overview
Solid Green
Blinking Green (slow)
Blinking Orange
Solid Red
Press the WPS button for 1 second to connect the siren to your wireless router using Wi-Fi Protected Setup.
Press the reset button for 5 seconds to reset the DCH-S220 back to the factory default settings.
Side
1
2
3
The device is connected to the network
WPS is working
The device is not connected to the network
The device is powering on or the firmware is being upgraded
5