Settings - Becker Centronic TimeControl TC511A Operating Instructions Manual

SETTING
The SETTING menu gives you the following options:
• HOLIDAY SETTING
• SUN (when sensor is connected)
• TWILIGHT SETTING (when sensor is connected)
• INTERMEDIATE POSITION
• VENTILATION/REVERSE
• PROG 1 (END LIMIT, INTERMEDIATE POSITION, VENTILATION/REVERSE)
• PROG 2 (END LIMIT, INTERMEDIATE POSITION, VENTILATION/REVERSE)
• TEST MODE (when sensor is connected)
• Language (GB ENGL)
• ASTRO SHIFT ▲
• ASTRO SHIFT ▼
• City (LONDON)
• LONGITUDE (Only when EXPERT MODE is ON)
• LATITUDE (Only when EXPERT MODE is ON)
• TIME ZONE (Only when EXPERT MODE is ON)
• SUMMER/WINTER (automatic clock adjustment for daylight saving chang-
es)
To set a function, press the OK button until you come to the required menu
level.
HOLIDAY SETTING
The holiday setting simulates an occupied house while you are on holiday.
If the function is activated (ON), the roller shutter/venetian blind varies randomly
from the programmed times (max.+ 30 mins.).
END LIMIT
The end limit is the point where the roller shutter/venetian blind is in the upper
or lower position.
INTERMEDIATE POSITION
The intermediate position is a position of the roller shutter/venetian blind be-
tween the upper and lower limits that can be freely selected. This position can
also be reached from the upper position after programming.
Press the DOWN button twice in rapid succession to move to the intermediate
position.

Settings

DE
GB
43