Operation; Setting The Timer - Buffalo CC038 Instruction Manual

Telephone Helpline: 0845 146 2887 (United Kingdom)

Operation

Power
Indicator light
Timer knob
Feet
Before using for the first time, the appliance must be cleaned. To clean the appliance:
Wash the wire rack and oven interior with warm soapy water and a damp cloth.
1.
Place the wire rack inside the oven.
2.
Close the door.
3.
Set the Temperature knob to 'MAX' and set the Timer knob to '5 minutes'.
4.
Note: See 'Setting the Timer' for setting times under 20 minutes.
When the minutes are over turn Off the appliance and disconnect from the power supply.
5.
Allow to cool. The appliance is now ready to use.
6.

Setting the Timer

The Timer knob also acts as the Power switch. When the Timer is set to '0' the power is Off.
Connect the appliance to the mains power supply.
1.
Set the Timer knob to the required time (0-120 minutes).
2.
Note: If the required time is under 20 minutes, the Timer must be turned beyond 20 and
then turned back down to the required setting in order to work.
The appliance will begin to heat up to the set temperature (see 'Setting the Temperature') and the
3.
Power Indicator light comes on.
Note: The Time can be adjusted during cooking if required. Simply adjust the setting as
required using the Timer knob.
When the Timer reaches '0' an audible alarm sounds and the appliance turns Off.
4.
UK
Handle
Wire Rack
Mounts
Fan
Temperature
Control knob
Temperature
light
2