7.9.10 Flooded engine conditions.
When the engine speed is below 450 r.p.m. and WOT is de-
tected the ECU will reduce the base map injection durations
by 40% and ignore all cold and post-start corrections in an
attempt to prevent further flooding.
7.9.11 Full load operation
Under full load operation the engine is required to deliver
maximum power and requires a richer A/F ratio. This condi-
tion is detected when the engine speed is above 450 r.p.m.
and WOT is selected allowing the ECU to increase the base
map injection duration by a given factor to ensure maximum
power delivery.