Nikon D500 User Manual page 212

5
Select a destination.
Choose a destination for the custom
Picture Control (C-1 through C-9) and
press 2.
6
Name the Picture Control.
The text-entry dialog shown at right
will be displayed. By default, new
Picture Controls are named by adding
a two-digit number (assigned
automatically) to the name of the
existing Picture Control; to use the
default name, proceed to Step 7. To
move the cursor in the name area, tap
the display or hold the W (M) button
and press 4 or 2. To enter a new
letter at the current cursor position,
tap the letters on the touch-screen keyboard (tap the
keyboard selection button to cycle through the upper-case,
lower-case, and symbol keyboards). You can also use the
multi selector to highlight the desired character in the
keyboard area and press the center of the multi selector. To
delete the character at the current cursor position, press the
O (Q) button.
Custom Picture Control names can be up to nineteen
characters long. Any characters after the nineteenth will be
deleted.
186
Name area
Keyboard
selection
Keyboard area