CME Control 2 Digital Booklet

Download this manual

Thank you for choosing a CME remote control.

The Control 2 Digital remote control is ideal for replacing up to 2 remote controls for TV - STB (satellite decoder or

Digital Terrestrial decoder). The remote control has a permanent memory, so it does not lose its settings even if there are

no batteries in it.

IMPORTANT: The remote control must not be exposed to excessive heat sources.

USE OF THE BUTTONS AND FUNCTIONS

The functions of the buttons described below are available only if they are on your original device.

Buttons for selecting the device to be

controlled.

Numeric keypad

Selects digital TV and radio

Volume control +/–

MUTE turns sound OFF and ON

For moving around within the MENU

TELETEXT buttons

Selects analogue/digital

Displays the list of programmes

Digital

Keep this booklet for future reference.

Indicator Light

For selecting an external

input source

For selecting the next programme

P+ or the previous rogramme P–

Speciﬁ c buttons for decoder

Fastext functions or for selecting sub-

menus using colours

ON/OFF switches the device OFF and

in some cases ON

Need help?

Do you have a question about the Control 2 Digital and is the answer not in the manual?

Page 1 Keep this booklet for future reference. The Control 2 Digital remote control is ideal for replacing up to 2 remote controls for TV - STB (satellite decoder or Digital Terrestrial decoder). The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
Page 2: Inserting The Batteries
Each original device has a speciﬁ c code which must be used to set up the remote control. So to use the Control 2 Digital you must enter the speciﬁ c code for each device you wish to control. So use one of the following methods to identify the correct code and set it in your remote control:...
Page 3 Point the CME remote control at the device, which should already be ON and press the ON/OFF button on the remote. If the device does NOT switch off, try setting the consecutive code in the SMS list on the remote control.
Page 4 • if for 12 seconds the button indicated is not pressed or if another button is pressed • if the list of codes to ﬁ nd is terminated. In this case, visit the www.cme.it website. ENTERING THE CODE DIRECTLY (only to be performed if you know the speciﬁ...
Page 5: Troubleshooting
• carefully read this Instructions Booklet which will allow you to solve most problems. • consult the www.cme.it website where you will ﬁ nd all the answers you need quickly and easily. 2 year WARRANTY Retailer stamp The warranty is voided if the product is tampered with or used improperly.