Subscribe to Our Youtube Channel
Summary of Contents for Turnstiles ETV Series
- Page 1 ETV Series Installation Guide Version 2.0 Version 2.0 Ted T Case Rights Reserved © 2006 www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
- Page 2 The operating system user names and passwords cannot be changed and the DVR cannot be added to a domain because either action will reduce functionality and potentially render the DVR inoperable. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 3: Table Of Contents
Port Forwarding the Router ............. 20 Sample D-Link Router............21 Sample Linksys Router ............22 o Windows TCP/IP ................25 o Network Troubleshooting ..............27 • Elite Technology DVR Ports ............... 31 www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... - Page 4 Liquor POS ..................44 o Micros 8700 IDN ................45 o Retail Pro ................... 46 o TVS Interface..................49 o Generic PC Based Data Tap............. 50 • Contact Information ..................51 www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 5: Package Contents
Support Brackets (Feet) Any 16 channel DVR will also include: 1- BNC Camera Rack door Keys Rack mount Brackets connector assembly Optional Accessories 1-RCA Audio POS Y-connector Kit connector assembly www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 6: Rear Panel Connections
Requires 1/8” stereo phone plug 11. BNC Camera Input Connectors Camera 1 is top connector 12. NTSC Output (Spot Monitor) Standard RCA Connector (White) 13. Sensor/Relay Module (Optional Component DIO-0804) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 7: Etv-30-16
14. BNC connectors NOT USED These connectors are NOT USED on a 16 channel DVR 15. 16 Channel Video Input Attach two DB-15/BNC flying lead connectors 16. Sensor/Relay Module (Optional Component DIO-0804) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 8: Etv-60/120-16
12. ETV-60-16 = 4 Channel Audio Input / 2 Channel Output ETV-120-16 = 8 Channel Audio Input / 2 Channel Output Attach DB-15/RCA flying lead connector 13. Sensor/Relay Module (Optional Component DIO-0804) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 9: Etv-240-16
Attach the DVI / BNC flying lead connectors 12. 16 Channel Audio Input / 2 Channel Output Attach the DVI / RCA flying lead connectors 13. Sensor/Relay Module (Optional Component DIO-0804) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 10: Etv-120/240-32
Attach DB-15/BNC flying lead connectors. Top connector is for Video channels 17~24 Bottom connector is for video channels 25~32 (Video connectors for channels 17~32 may be in different location depending on other installed options.) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 11: Basic Connections
If that happens, make sure your cameras are attached and powered, and then restart the DVR. Then open ‘Settings’ and assign a frame rate to the affected channels to reactivate them. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 12: Rca Audio Connectors
Attach AC Power Cable from Line Conditioner. (Power Switch ) Power Switch – If the DVR does not power up when you plug it in, toggle the power switch off and then back on. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 13: Optional And Advanced Connections
Firewall in place to protect against virus and trojan infections. Internet Virus attacks are NOT covered under warranty !! ( Most Routers have a Firewall built in.) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 14: Sensor/Relay Modules
2. In DVR software open ‘Settings’ and click on ‘Camera Control’ tab. 3. Select camera type and set ‘COM Port’ to ‘Onboard RS-422’ 4. Set camera ID and click on ‘Apply’. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 15: Dio-0804
Pull the black ‘Jumper’ from the berg pins that are next to the relay you want to set. Move the jumper to connect pins 2 and 3. That will set the relay to a ‘normal closed’ state. (Pin location ) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... - Page 16 Attach the second card to the middle connector on the ribbon cable and secure the card in place in an open slot in the DVR. In DVR software, open ‘Settings’ – ‘DVR Settings’ – ‘Hardware’. Set ‘Slave DIO Board’ to ‘0804’. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 17: Getting The Dvr On A Network
If you do not see these connection indicators, check the cable to make sure it is good. If the indicators do not light, you have not established a connection. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... - Page 18 DVR. If you are connecting to an existing network server, consult with your network administrator before proceeding. Connecting directly to a Cable or DSL modem without a firewall can void your warranty) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 19: The Ipconfig Command
(Your command prompt may have different drive letter and directories showing, usually C:\documents and settings\dvr\>_ or similar.) At the command prompt type: Ipconfig /all (leave a space between ipconfig and the / ) Press ‘Enter’ on your keyboard. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... - Page 20 Once you have noted the Gateway and IP Address, close the DOS prompt by clicking the [X] on the top right corner. (For instructions on how to check the network adapter status, see the ‘Troubleshooting’ section.) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 21: Accessing The Router
You should get a logon prompt from the router. Consult the router manual for the default username and password. (Or consult the onsite IT person if connecting to an existing network) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 22: Port Forwarding The Router
(This would cause your incoming signal to be ‘Port Forwarded’ to the wrong computer.) For our example, any address between 192.168.0.2 and 192.168.0.99 will be outside the routers IP Address Range. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 23: Sample D-Link Router
‘Advanced Configuration’, ‘DHCP’, ‘NAT’, ‘Applications and Gaming’, ‘Virtual Servers’ or ‘Pinholes’ depending on the router model and manufacturer.) In this example the ‘Port Forwarding’ is done on the ‘Virtual Server’ page. (D-Link Di-604) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 24: Sample Linksys Router
192.168.x.xx range. See ‘Troubleshooting’ section for more on this.) In this example (Cayman DSL-Modem/Router) port forwarding is referred to as ‘Pinhole Configuration’. Each port must be entered separately on this router. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... - Page 25 End Port, Trigger Port, Public Port, Private Port, Internal Port) for each entry or pinhole. Example= Name Start Port End Port Protocol Private IP Private Port DVR1 2000 2000 192.168.0.50 2000 www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
- Page 26 Internal Port for each entry.) Your router will probably look different from these examples. Refer to the router manual for more details on how to find and configure Port Forwarding. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 27: Windows Tcp/Ip
Right click on the ‘Local Area Connection’ icon and choose ‘Properties’ from the pop-up menu. Find ‘Internet Protocol (TCP/IP) in the list. Click on it once to highlight it, then click on the ‘Properties’ button. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... - Page 28 Close out of all open properties boxes and start the DVR software. If you have entered all of the IP addresses and configured Port forwarding correctly, the DVR is now configured for Remote Access. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 29: Network Troubleshooting
Highlight ‘Internet Protocol(TCP/IP)’ and click the ‘Properties’ button. Put a check in ‘Show icon in taskbar when connected’ OK your way out of the Network properties boxes and check for the icon. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... - Page 30 (That leaves 192.168.1.2 and above open for computer addresses.) Now port forward the router to the internal address of the DVR. If you did it right it should map out like this: www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
- Page 31 Internal IP Address = 10.10.10.1 - - - - -(The DVRs’ gateway) Port Forwarded to = 10.10.10.2 The DVR configuration is: External IP Address = 10.10.10.2 Gateway IP Address = 10.10.10.1 www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
- Page 32 Your external ‘Internet IP Address’ is displayed at the bottom of the page on Network-Tools.com and at the top of the page at Whatismyip.com. Use this address when connecting to the DVR from a remote location. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 33: Elite Technology Dvr Ports
Port 22800 (Port can be changed in Radmin software) (Radmin is a third party remote administration and diagnostic software) (This port is not necessary for the DVR unless you have Radmin installed) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 34: Pos Connections
The next step is to connect the POS T-tap assembly between the register and the receipt printer. (The POS data is captured when information is sent to the printer. NO DATA will be captured unless a receipt is printed.) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 35: Wiring The Adapters
COM Port on the rear panel. (See ‘Rear panel Connections’ diagram for your model to determine location.) Attach the other end of your Cat-5 cable to this adapter and you are done with the wiring. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 36: Usb Adapter
Plug the RJ-12 end of the adapter into the back of the register. Verify that the display still works. If so, connect the rest of your cables using the same steps as described above for the standard POS connections. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 37: Using Hyperterminal
If you are connected to the standard COM port DB-9 on the DVR, choose COM 1. If you are using a USB pigtail, choose COM 3 or higher. (COM 1 is always the built in DB-9) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... - Page 38 Click on the ‘Live Data’ button again to see if your data shows up. Remember-NO DATA will appear until a receipt is printed or a pole display is activated. (Depending on your connection type.) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 39: Data Capture With Hyperterminal
Data Capture with HyperTerminal Although the Electronics Line ETV Series DVR comes ready to connect to most registers, you may encounter a register that may be showing in the list of supported registers but still won’t show any data in the ‘Live Data’... - Page 40 Copy the file to a floppy disk and send it to Electronics line USA. We will forward the file to our software engineers and contact you when we have solution ready. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 41: Data Capture With Pos Collector
Always connect with HyperTerminal first to ensure you are getting a data stream. (POS collector won’t show if the data is streaming or not.) The POS Collector software is located on the ETV Series support CD. (The DVR will need to be out of ‘Kiosk’ mode.) Insert the support CD into the drive and open ‘My Computer’. -
Page 42: Common Baud Rates And Settings
(Pole Display) Retail Pro 9600 None RORC VPOS Samsung 6500 9600 None Sharp 3300 Sonic 824 Spirit 2000 SubShop 2000 TDL 6.3.4 TEC 3600 1066A/2066 TVC 2100 VeriFone Ruby 9600 None www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 43: Pos Troubleshooting Tips
(Entries that are blank on the settings chart above indicate that the register may have a variety of choices determined by printer type or other factors. Also, some data was unavailable at the time this guide was written.) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 44: Pos Connection Wiring Diagrams
RJ-45 to DB-9 adapter, and how they relate to the Cat-5 connector colors. Below is a standard pinout for the male and female DB-9 connectors. (The DB-9s are also, usually, numbered on the face of the connector.) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 45: Gilbarco Pc
You will need to have a qualified technician program the register to send ‘Security Data’ to the Journal port. Refer to your ETV series Server Manual for instructions on how to set up the Com port on the DVR to receive and display the data. -
Page 46: Liquor Pos
Liquor POS Pole Display Connection To connect the ETV series DVR to a Liquor POS computer for data capture you will need: 2 - DB-9 Female to RJ-45 Adapters 1 - Cat 5 cable from register to DVR 1 - USB to DB-9 Adapter (If COM port is already in use on register) -
Page 47: Micros 8700 Idn
Stop Bits = 1 Parity = None If cable run to DVR is MORE than 75 feet you will need to use a signal booster. (RS-232 to RS-485 converter or Extend-IT device) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 48: Retail Pro
Retail Pro Pole Display Connection To connect the ETV series DVR to a Retail Pro POS computer for data capture you will need: 2 - DB-9 Female to RJ-45 Adapters 1 - Cat 5 cable from register to DVR 1 - USB to DB-9 Adapter (If COM port is already in use on register) - Page 49 Set Baud Rate, Data Bits, Stop Bits and Parity the same as the ATEN USB device shown above. Click on ‘OK’ to close the ‘Settings’ dialogue. Open the ‘Live Data’ window. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
- Page 50 The ‘Live Data’ will show the Date, Time, Register #, Item, Price, Tax, and Total For more information on how to set up the Retail Pro software consult your Retail Pro dealer. www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
-
Page 51: Tvs Interface
Pin 1 from TVS will connect to Pin 5 of DVR Black lead Pin 2 from TVS will connect to Pin 3 of DVR White lead Pin 3 from TVS will connect to Pin 2 of DVR Red lead www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 52: Generic Pc Based Data Tap
Pin 2 (Red) Pin 3 (White) Pin 3 (White) Connects to Pin 2 (Red) Pin 5 (Black) Pin 5 (Black) (Cross pins 2 and 3, connect pin 5 straight through) www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433... -
Page 53: Contact Information
14) Username and Password for Routers If you are not sure how to find these details, call Patrick McAllister for assistance @ 303 670 1099 ext 11. Or email: patrick.mcallister@turnstiles.us www.TURNSTILES.us * 8641 South Warhawk Road * Conifer, CO 80433...
Need help?
Do you have a question about the ETV Series and is the answer not in the manual?
Questions and answers