Advertisement
Quick Links
Rev 040810
USA Office:
5410 Newport Drive • Rolling Meadows, IL 60008
Phone: (800) 528-4343
Fax: (847) 259-1300
Email: info@nitek.net
Web: www.nitek.net
Installation and
Operation Manual
VH856
VH1656
VH856M
VH1656M
NITEK
®
Europe Office (Netherlands):
De Schans 19-21 2a • 8231 KA Lelystad
Phone: +31(0) 320-230005
Fax: +31(0) 320-282186
Email: info@nitek.nl
Web: www.nitek.nl
Advertisement
Related Manuals for Nitek VH856
Summary of Contents for Nitek VH856
-
Page 1: Installation And
Installation and Operation Manual VH856 VH1656 VH856M VH1656M NITEK ® Rev 040810 USA Office: Europe Office (Netherlands): 5410 Newport Drive • Rolling Meadows, IL 60008 De Schans 19-21 2a • 8231 KA Lelystad Phone: (800) 528-4343 Phone: +31(0) 320-230005 Fax: (847) 259-1300 Fax: +31(0) 320-282186 Email: info@nitek.net... - Page 2 Reduce risk of fire or electrical shock. Do not expose this product to rain or moisture. Installation UTP Video Receiver Hubs are designed to receive standard UTP video and output standard coax video. Step 1) Check the twisted pair for distance and continuity. Do this by shorting the pair of wires at one end and use an ohm meter to check the resistance at the other end.
- Page 3 Step 4) Remove the front panel of the receiver by pulling the knobs toward you. Inside locate the receiver unit to match the camera you are working on. Set the DIP switches for your camera distance as listed below. Use the setting closest to your actual cable length. If you have no video or a streak through your video your wire pair may be reversed.
- Page 4 Troubleshooting Problem Video inverted or rolling and unstable. Fix/Cause • Reverse the wires of the twister pair at either the transmitter or receiver. Problem No video out at the receiver. Fix/Cause • Check to make sure that there is video in at the transmit end.