Checking The Cabinet And Systems - NEC Express 456-01721-000 Read Me First

Figure 13. Moving the Cabinet Down the Pallet Ramp
3. Check the cabinet and systems for damage, as the next
section describes.

Checking the Cabinet and Systems

Check the cabinet, systems, and optional components for
damage:
1. Open the rear door of the cabinet. From the bottom of the
cabinet, remove and discard the desiccant bags.
2. Check the cabinet and systems for damage. Verify that the
cabinets and panels have no dents, scratches, or scrapes.
If you notice damage, contact the vendor from which you
purchased your systems. If you purchased your systems from
NEC Corporation of America, contact the NEC Technical
Support.
-17-
msys104