NEC NP4001/NP4000 User Manual page 105

I
TEM
Select the default Color System to use for Video or S-Video input.
Color System
Range: Auto, NTSC, PAL, SECAM (see page 95).
Set this item to on to have the projector display a message when the air
Filter Message filter needs servicing.
Range: Off, 100[H], 200[H], 500[H], 1000[H] (see page 95).
Auto Start
Auto Start enables the projector to start automatically when the power cable is con-
nected to an active power outlet and the main power switch is on. This eliminates the
need to always use the POWER (ON/STANDBY) button on the remote control or projec-
tor cabinet. To use the Auto Start function, you must first press the main power switch to
On before connecting the power cable.
Note:
When the projector is off by using the POWER button (or put in the standby
mode) and the power cable is disconnected, Auto Start will not activate after
power (AC) is applied.
When the projector is off by using the Direct Power Off function or after the
power (AC) is removed (no standby mode), Auto Start will be activated after
power (AC) is applied.
The Direct Power Off function means you can turn off the power (AC) to the
projector by using a power strip equipped with a switch and a breaker.
Power Management
Power Management enables the projector to automatically turn off if there is no signal
received by any input.
5. Using On-Screen Display
D
ESCRIPTION
93