AVANCA Charging Hub — User Manual (EN) ® 1. Package Contents Avanca Charging Hub ® Detachable Power Cable (1,6 m) User Manual 2. Technical specifications Input: AC 100-240V Charging port output: 5V, 2.1 - 2.4A max Total maximum output: 5.5A (5V, 27.5W) Dimensions: 9.1 x 5.8 x 2.6 cm...
› Standby power consumption: Less than 0.5W 3. User instructions Connect the included power cable to the Avanca Charging Hub. Connect the power cable to the mains supply. Connect the device/devices you want to charge to a USB cable (e.g. the original cable included with your device).
AVANCA Charging Hub — User Manual (EN) ® device) when connecting your device to the Avanca Charging Hub. › Keep the product away from sharp objects. › Do not place heavy objects on top of the product. › Do not use any (chemical or organic) liquids with the product.
Page 7
AVANCA Charging Hub — User Manual (EN) ® The Avanca Charging Hub is not charging my device(s) Check to ensure that your device is USB-powered with an input current of 2.4A maximum and a voltage input of 5V. Check to ensure that your device is correctly connected with a USB cable to one of the charging ports.
Page 8
No, the charger will only supply the maximum charge current allowed by your device up to 2.4A. Do I have to disconnect the Avanca Charging Hub when I am not charging devices? It is not necessary to disconnect the Avanca Charging Hub, power...
Page 9
Charging Hub — User Manual (EN) ® consumption in standby mode is less than 0.5W. The Avanca Charging Hub is charging my devices at a very slow speed. Check to ensure that you are using the correct cable to connect and charge your device (e.g.
AVANCA Charging Hub — Handleiding (NL) ® 1. Inhoud in de verpakking Avanca Charging hub ® Los te koppelen stroomkabel (1.6m) Gebruikershandleiding 2. Technische specificaties Input: AC 100-240 V Output van de poort voor het opladen: 5V, 2.1 - 2.4A Maximale output: 5.5A (5V, 27.5W)
› Stroomconsumptie tijdens stand-by: minder dan 0.5W 3. Instructies voor de gebruiker › Koppel de bijgeleverde stroomkabel aan de Avanca Charging Hub › Koppel de stroomkabel aan het stroomnet › Koppel de toestel(len) die u wilt opladen aan een USB-kabel (bv de oorspronkelijke kabel die bij uw toestel geleverd was) ›...
Page 12
Gebruik geen chemische of organische vloeistoffen met het product. Houd het product uit de buurt van warmtebronnen. 5. Reiniging Ontkoppel de Avanca Charging Hub van het net alvorens u deze schoonmaakt. Maak het product schoon met een vochtig doekje. Geb- ruik geen chemische vloeistoffen of olie! 6.
Page 13
Ga na of de stroomkabel niet defect is en of die in een actieve stekker steekt. Ga na of ze stevig in de Avanca Charging Hub zit. Hoe snel zal mijn toestel opladen? Ten eerste is dit afhankelijk van het aantal toestellen dat aan de USB Hub verbonden is.
Page 14
Indien uw toestel de mogelijkheid heeft snel op te laden, gebruik de smart IC USB port. De auto-detect-functie van de Avanca Charging Hub zal altijd de beste snelheid gebruiken voor het opladen van uw toestel. Dit betekent dat uw toestel altijd minstens even snel zal opladen als wanneer men het via een normale stroomtoevoer zou doen.
Page 15
Moet ik de Avanca Charging Hub ontkoppelen indien er geen toestellen opladen? Het is niet nodig de Avanca Charging Hub te ontkoppelen; het stroomverbruik in stand-by is immers minder dan 0.5W. De Avanca Charging Hub laadt mijn toestel heel traag op.
AVANCA Charging Hub — Manuel (FR) ® 1. Contenu du pack Base de chargement Avanca ® Câble d’alimentation amovible (1,6 m) Manuel de l’utilisateur 2. Caractéristiques techniques Entrée : AC 100-240 V Sortie du port de charge : 5 V, 2.1 - 2.4 A max Puissance de sortie maximale totale :...
Page 17
AVANCA Charging Hub — Manuel (FR) ® › Protection contre la surcharge la surchauffe et les courts-cir cuits au niveau du port, › Certifié CE, FCC et RoHS › Consommation en veille : moins de 0,5W 3. Mode d’emploi (Instructions à l’utilisateur) Branchez le câble d’alimentation fourni avec la base de...
AVANCA Charging Hub — Manuel (FR) ® 4. Branchez le câble USB à l’un des ports de chargement USB. Remarque : Vous pouvez utiliser n’importe lequel des cinq ports pour recharger vos appareils. Les ports marqués par des icônes représentant la foudre sont des ports IC intelligents et la charge d’appareils tels que l’iPhone 6/6 plus est encore plus rapide.
Charging Hub — Manuel (FR) ® 5. Nettoyage Débranchez la base de chargement Avanca du réseau électrique avant de le nettoyer. Nettoyez le produit avec un chiffon humide. Ne pas utiliser de liquides chimiques ou de l’huile ! 6. FAQ et dépannage Quel port de chargement dois-je utiliser pour charger mon appareil ?
Page 20
AVANCA Charging Hub — Manuel (FR) ® La base de chargement Avanca ne charge pas mon/mes appareil(s) Effectuez une vérification pour vous assurer que votre appa reil est alimenté par USB avec un courant d’entrée maximum de 2,4 A et une tension d’entrée de 5 V.
Page 21
USB IC intelligents sur l’USB. La fonction de détection automatique de la base de chargement Avanca fournira toujours la vitesse de chargement la plus optimale pour votre appareil. Cela signifie que votre appareil se charge au moins aussi rapidement que lorsque vous souhaitez utiliser une alimentation normale.
Page 22
Non, le chargeur ne fournira que le courant de charge maximal autorisé par votre appareil à concurrence de 2,4 A. Dois-je débrancher la base de chargement Avanca quand je ne charge pas d’appareils ? Il n’est pas nécessaire de débrancher la base de chargement Avanca, sa consommation d’énergie en mode veille est inférieure...
Page 23
Puis-je utiliser la base de chargement Avanca dans d’autres pays ? Oui, la base de chargement Avanca est compatible avec un courant d’alimentation allant de 100 à 240 V. Le câble d’alimentation est toutefois conçu pour le pays où il a été...
Page 25
CE, FCC und ROHS zertifiziert › Standby-Energieverbrauch: Weniger als 0.5W 3. Betriebsanleitung Verbinden Sie das beiliegende Netzkabel mit dem Avanca Lade- Hub. Verbinden Sie das Netzkabel mit dem Stromnetz. Verbinden Sie das Gerät/die Geräte, die Sie laden möchten, mit einem USB-Kabel (z.B. dem Originalkabel, das mit dem jeweiligen Gerät mitgeliefert wurde).
Page 26
Verwenden Sie keinerlei (chemische oder organische) Flüssigkeiten mit dem Produkt. Halten Sie das Produkt von Hitzequellen fern. 5. Reinigung Trennen Sie den Avanca Lade-Hub vom Netz, bevor Sie ihn reinigen. Reinigen Sie das Produkt mit einem feuchten Tuch. Verwenden Sie keinerlei chemische Flüssigkeiten oder Öl!
Page 27
Dank der Autodetect-Funktion kann jeder Ladeanschluss jedes Gerät laden. Beachten Sie, dass die intelligenten IC-Ports mit dem Blitzsymbol Geräte wie das iPhone 6/6Plus schneller laden. Der Avanca Lade-Hub lädt mein(e) Gerät(e) nicht Stellen Sie sicher, dass Ihr Gerät über eine USB-Stromversorgung mit einem maximalen Eingangsstrom von 2.4A und einer Spannung von 5V verfügt.
Page 28
AVANCA Charging Hub — Bedienungsanleitung (DE) ® betriebsbereiten Steckdose und fest mit dem Avanca Lade-Hub verbunden ist. Wie schnell wird mein Gerät geladen? Vor allem kommt es darauf an, wie viele Geräte an den USB-Hub angeschlossen sind. Der maximale Gesamtausgangsstrom des USB-Hub beträgt 5.5A.
Page 29
Nein, das Ladegerät liefert nur den von ihrem Gerät erlaubten Ladestrom bis zu 2.4A. Muss ich den Avanca Lade-Hub vom Netz trennen, wenn ich keine Geräte lade? Es ist nicht nötig, den Avanca Lade-Hub vom Netz zu trennen, die Leistung im Standby-Modus beträgt lediglich 0.5W.
Page 30
Ladestrom nicht höher als 5.5A ist. Kann ich den Avanca Lade-Hub in anderen Ländern verwenden? Ja, der Avanca Lade-Hub ist mit einer Netzspannung von 100- 240V kompatibel. Das mitgelieferte Netzkabel ist jedoch für das Land entwickelt, in das das Gerät ursprünglich ausgeliefert wurde.
AVANCA Charging Hub — Manual de Usuario (ES) ® 1. Contenido del paquete Hub Cargador Avanca® Cable eléctrico extraíble (1,6 m) Manual de Usuario 2. Especificaciones técnicas Potencia de entrada: AC 100-240V Potencia de salida del puerto cargador: 5V, 2.1 - 2.4A max Máxima potencia de salida total:...
Charging Hub — Manual de Usuario (ES) ® 3. Instrucciones para el usuario Conecte el cable eléctrico incluido al Hub Cargador Avanca. Conecte el cable eléctrico a la red eléctrica principal. Conecte el dispositivo /dispositivos que quiera cargar a un cable USB (ej., el cable original incluido en su dispositivo).
Page 33
No utilice ningún líquido (químico u orgánico) con el producto. Mantenga el producto alejado de fuentes de calor. 5. Limpieza Desconecte el Hub Cargador Avanca de la red eléctrica antes de limpiarlo. Limpie el producto con un paño húmedo. ¡No use líquidos químicos ni aceite! 6.
Page 34
AVANCA Charging Hub — Manual de Usuario (ES) ® El Hub Cargador Avanca no está cargando mi(s) dispositivo(s) Compruebe que su dispositivo USB funciona con una potencia eléctrica de entrada de 2.4A máximo y con un voltaje de entrada de 5V.
Page 35
Si su dispositivo tiene la función de carga rápida, puede usar los puertos USB IC del cargador. La función de autodetección del el Hub Cargador Avanca le pro porcionará siempre la velocidad de carga optima para su dispositivo. Esto significa que su dispositivo se cargará al menos tan rápido como cuando utiliza una fuente de alimentación...
Page 36
¿Tengo que desconectar el Hub Cargador Avanca cuando no estoy cargando ningún dispositivo? No es necesario desconectar el Hub Cargador Avanca, su con sumo en modo standby es menos de 0.5W. El Hub Cargador Avanca está cargando mi dispositivo a una velocidad muy baja Compruebe que está...
Page 37
Charging Hub — Manual de Usuario (ES) ® ¿Puedo usar el Hub Cargador Avanca en otros países? Sí, el Hub Cargador Avanca es compatible con corriente de 100- 240V. El cable eléctrico, sin embargo, está diseñado específicamente para el país al que se envío originalmente.
AVANCA Charging Hub — Manuale utente (IT) ® 1. Contenuto della confezione Hub di Ricarica AVANCA® Cavo di alimentazione rimovibile (1,6 m) Manuale utente 2. Specifiche tecniche Ingresso: 100-240V AC Uscita porta di ricarica: 5V, 2,1 - 2,4A max Potenza di uscita totale massima:...
AVANCA Charging Hub — Manuale utente (IT) ® › Protezione a livello della porta contro il sovraccarico, il surriscal damento e i corti circuiti. › Certificato CE, FCC e ROHS › Consumo energetico in modalità di standby: Meno di 0,5W 3.
Non utilizzare liquidi (chimici o biologici) con il prodotto. Tenere il prodotto lontano dalle fonti di calore. 5. Pulizia Scollegare l’Hub di Ricarica Avanca dalla rete elettrica prima di pulire. Pulire il prodotto con un panno umido. Non utilizzare liquidi chimici o olio!
IC con le icone del fulmine caricheranno i dispositivi come iPhone 6/6Plus più velocemente. L’Hub di Ricarica Avanca non carica il mio dispositivo o i miei dispositivi Controllare che il dispositivo sia alimentato dalla porta USB con una corrente in ingresso massima di 2,4A e una tensione in ingresso di 5V.
Page 42
Se il vostro dispositivo ha la funzione di ricarica rapida, è possibile utilizzare le porte intelligenti USB IC sull’USB. La funzione di rilevamento automatico dell’Hub di Ricarica Avanca fornirà sempre la velocità di ricarica più adatta al vostro dispositivo. Ciò significa che il dispositivo verrà caricato per lo meno più...
Page 43
No, il caricabatterie fornirà solo la corrente di carica massima consentita dal proprio dispositivo e fino a 2,4A. Devo scollegare l’Hub di Ricarica Avanca quando non sto caricando dei dispositivi? Non è necessario scollegare l’Hub di Ricarica Avanca, il consumo energetico in modalità di standby è inferiore a 0,5W.
Page 44
5,5A. Posso utilizzare l’Hub di Ricarica Avanca in altri paesi? Sì, l’Hub di Ricarica Avanca è compatibile con una tensione di alimentazione di 100-240V. Tuttavia, il cavo di alimentazione è stato progettato per il paese verso cui è stato originariamente spedito.
Page 46
Copyright Avanca International BV. www.avancaproducts.com...
Need help?
Do you have a question about the CHARGING HUB and is the answer not in the manual?
Questions and answers