Nikon COOLPIX L330 User Manual page 105

Problem
Streaks of light or partial
discoloration are visible in
the monitor.
Bright specks appear in
images captured with flash.
Flash does not fire.
Digital zoom cannot be
used.
Image mode not available.
No sound when shutter is
released.
AF-assist illuminator does
not light.
Images appear smeared.
Cause/Solution
Smear occurs when extremely bright light strikes the
image sensor. When shooting with Continuous set
to Multi-shot 16 and when recording movies,
avoiding bright objects, such as the sun, reflections of
the sun, and electric lights is recommended.
The flash is reflecting off particles in the air. Lower the
flash.
The flash is lowered.
A scene mode that restricts the flash is selected.
On is selected for Blink proof in the smart portrait
menu.
A function that restricts the flash is enabled.
Digital zoom cannot be used in the following
situations.
- When Portrait, Night portrait or Pet portrait
is selected in scene mode
- When smart portrait mode is selected
- When Continuous in the shooting menu is set
to Multi-shot 16
A function that restricts the Image mode option is
enabled.
Off is selected for Sound settings > Shutter
sound in the setup menu. No sound is produced
with some shooting modes and settings, even
when On is selected.
Do not block the speaker.
Off is selected for the AF assist option in the setup
menu. AF-assist illuminator may not light depending
on the current scene mode, even when Auto is
selected.
The lens is dirty. Clean the lens.
A
50, E25,
F3
5, 40
5, 40
47
50, E29
51
32
36
50, E25
51
65, E48
1
65, E48
F7
F11