HP Pavilion dv6000 Maintenance And Service Manual page 37

Your preferences go into effect when the computer restarts in
Windows.
Navigating and Selecting in the Setup Utility
Because the Setup Utility is not Windows-based, it does not
support the TouchPad. Navigation and selection are by keystroke.
■
■
■
■
■
Displaying System Information
The following procedure explains how to display system
information in the Setup Utility. If the Setup Utility is not open,
begin at step 1. If the Setup Utility is open, begin at step 2.
Maintenance and Service Guide
http://mycomp.su - Maintenance and Service Guide,Motherboard Schematics for Laptop/notebook
Ремонт ноутбуков.Запчасти и комплектующие для ноутбука.
Схемы,сервис мануалы,инструкции по разборке ноутбука.
5. To set your preferences and exit the Setup Utility, press
and then follow the instructions on the screen.
To choose a menu or a menu item, use the arrow keys.
To choose an item in a drop-down list or to toggle a field,
for example an Enable/Disable field, use either the arrow
keys or or
f5 f6
To select an item, press
To close a text box or return to the menu display, press
To display additional navigation and selection information
while the Setup Utility is open, press
1. To start the Setup Utility, turn on or restart the computer, and
then press while "Press <F10> to enter setup" is displayed
f10
in the lower-left corner of the screen.
2. Access the system information by using the Main menu.
3. To exit the Setup Utility without changing any settings, use
the arrow keys to select Exit > Exit Discarding Changes,
and then press
.
.
enter
. (The computer restarts in Windows.)
enter
Troubleshooting
.
f1
f10
.
esc
2–9