How To Use - Salton Jewelry Spa JW-1 Owner's Manual

How
to
Use Your
Salton Jewelry
Spa'.
1.
Fill
Spa chamber
(c)to the water
line with clean, warm water.
Add
1/2 teaspoon
of mild
liquid
dishsoap.
2.
Put jewelry
to be cleaned in baskets,
(b) taking care not
to
overload basket.
3.
Place baskets into chamber with handle grips turned into the
center portion of the Spa. Place lid (a) onto the Jewelry SpaJ"
and plug into a
120 volt outlet.
4.
Move activator switch (d) into the marked
"High"
position.
After five
to six minutes, move the switch back to "Offl'
5. Unplug the Jewelry SpaJ. remove lid, jewelry baskets and
empty liquid from Spa chamber.
Refill
with fresh, clean water.
6.
Replace trays, lid
and plug into
120
volt
outlet.
7.
Move activator switch into
"Low"
position for one minute
of
sonic treatment.
8.
Switch
to Off, remove lid and hang trays on Spa side
rim for
-
air
drying.=---
9.
Remove jewelry
and place on
soft, lint free cloth.
10. Unplug the Jewelry
Spa" and pour out
liquid.
11. For best results always use fresir water.
A.
View-through Lid
B.
Vented
Jewelry Baskets
C. Spa
Chamber
D. ON/OFF
Switch