Table of Contents
Advertisement
Set Time
Follow the steps below to set the day of the week and current time:
1.
Press MENU
2.
Press SET TIME
3.
Day of the week will be flashing. Use the
day of the week.
4.
Press NEXT STEP
5.
The current hour is flashing. Use the
When using 12-hour time, make sure the correct a.m. or p.m. choice is selected.
6.
Press NEXT STEP
7.
Minutes are now flashing. Use the
8.
Press DONE when completed
Programming
All programmable Pro1 thermostats are shipped with an energy saving pre-program. You can customize
this default program by following the Set Program Schedule.
Your thermostat can be programmed to have each day of the week programmed uniquely (7days), all the
weekdays the same with a separate program for Saturday and a separate program for Sunday (5+1+1),
or nonprogrammable. There are four time periods for each day (WAKE, LEAVE, RETURN, SLEEP).
This thermostat has a programmable fan feature, which allows you to run the fan continuously during any
time period.
Day of the
Events
Week
Weekday
Wake
Leave
Return
Sleep
Saturday
Wake
Leave
Return
Sleep
Sunday
Wake
Leave
Return
Sleep
PROGRAMMING THE THERMOSTAT
or
or
or
key to select current minutes.
Factory Default Program
Setpoint
Time
Temperature (Heat)
6 a.m.
70° F (21° C)
8 a.m.
62° F (17° C)
6 p.m.
70° F (21° C)
10 p.m.
62° F (17° C)
8 a.m.
70° F (21° C)
10 a.m.
62° F (17° C)
6 p.m.
70° F (21° C)
11 p.m.
62° F (17° C)
8 a.m.
70° F (21° C)
10 a.m.
62° F (17° C)
6 p.m.
70° F (21° C)
11 p.m.
62° F (17° C)
key to select the current
key to select the current hour.
Setpoint
Temperature (Cool)
75° F (24° C)
83° F (28° C)
75° F (24° C)
78° F (26° C)
75° F (24° C)
83° F (28° C)
75° F (24° C)
78° F (26° C)
75° F (24° C)
83° F (28° C)
75° F (24° C)
78° F (26° C)
Zone
(If R251W is connected)
System Average
System Average
System Average
System Average
System Average
System Average
System Average
System Average
System Average
System Average
System Average
System Average
15
Advertisement
Table of Contents
