Specifications - Sony PWS-100MG1 Operation Manual

Specifications

General
Power requirement
100 V to 240 V AC
50/60 Hz
Power consumption
235 W
Standby power consumption
3 W or lower
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Storage temperature
–20 °C to +60 °C (−4 °F to +140 °F)
Operating humidity
20% to 90% (relative humidity)
Storage humidity
5% to 80%
Mass 14 kg (30 lb. 14 oz.)
440 × 43.6 × 640 mm (17
Dimensions
1
25
CPU
Processor Intel Core i7-3770 (3.4 GHz)
Memory 8 GBytes
SO-DIMM (DDR3) (2)
Drive (m-SATA)
60 GBytes
Drives (HDD)
2.5-inch, 500 GBytes (12)
Expansion bus PCIe Gen2 8Lane (30 W) (2)
18
Specifications
3 × 1 3
/ /
8 4
/ in.) (width / height / depth)
4
Units: mm (in.)
Inputs/outputs
LAN
1) Network card connected to the unit
•
Intel Ethernet Converged Network Adapter X520-DA1
For information about the network card, visit the following site.
http://www.intel.com/support/go/network/adapter/userguide.htm
2) Supported only when SFP+ module is attached.
USB (front panel/rear panel)
HDMI
×
DisplayPort
Optional accessories
PWSK-101 Optional Power Supply
Design and specifications are subject to change without
notice.
Depending on the operating environment, unauthorized
third parties on the network may be able to access the
unit. When connecting the unit to the network, be sure to
confirm that the network is protected securely.
RJ-45 (2)
1000BASE-T
100BASE-TX
SFP+ (1)
10GBASE-SR/LR (Add-in Card)
Super Speed USB (USB 3.0) Type A
(6, 2 on front and 4 on rear)
Front: Power delivery support (900 mA/
port)
Rear: Power delivery support on bottom
right port (900 mA), not supported on
other three ports
Type A (1)
HDMI Ver. 1.4a,
1920 × 1200 maximum resolution,
60 Hz
DisplayPort (1)
DisplayPort Ver. 1.1a,
2560 × 1600 maximum resolution,
60 Hz
1)2)