Do you have a question about the pj200 and is the answer not in the manual?
Questions and answers
Summary of Contents for AWA pj200
Page 1
Pocket Projector PJ200 User's manual The style and parts of the product shown in this manual may be different from the actual unit due to various models.
Safety Information • Keep away from water or moisture and dusty areas. • Never store in hot and very cold areas. • Only use attachments/accessories specified by the manufacturer. • No objects filled with liquids, such as vases, shall be placed on apparatus.
Contents Safety Information ................2 Package contents ................2 Contents .....................3 Product overview................4 Remote control ..................7 - Remote control operation range .............. 9 - Using the remote control for the first time ..........9 - Battery replacement of the remote control ..........9 - Cautions of the remote control ...............10 - Charging the battery ................11 - Charging the battery using the power adapter.
Product overview • Press to move up in the menus. • Press to increase the volume. Standby / On: Press to enter standby mode or wake up the projector. Left / Previous: • Press to move left in the menus. •...
Page 5
Power indicator: Lights yellow-green when the power is on, lights red when the power is in standby mode. Charging indicator: Lights orange when charging the battery, lights yellow-green when the charging procedure is complete. Lens Speakers SD/MMC/MS card slot: Accommodates SD, SDHC, MMC, MS or MS Pro card.
Tripod stand hole: Attaches to a standard tripod with ¼" - 20 thread. Focus wheel: Adjust the focus distance. Remote control sensor Mini USB port DC-IN 5V jack: Connect to supplied AC power adapter. Power switch: Puts the porjector's power to on or off. Caution: Before switching off the projector's power, please enter the standby mode by pressing Standby/On button.
Remote control Setup: Press to enter Setup mode. Standby / On: Turn on the projector or go to standby mode. Press to move up in the menus. Play / Pause / OK: • Press to play or pause the playback. •...
Page 8
Menu / Stop / Back • Press to return to the upper menu or main menu. • Press to stop the current playback file under Video and Music mode. • Press to bring up the thumbnail in the Photo mode. Right / F.FWD / Next: •...
Remote control Remote control operation range • Point the remote control unit no more than meters from the remote control sensor and within 60° of the right of the unit. The operating distance may vary according to the brightness of the room.
Cautions of the remote control • Small button cell batteries such as used in the remote handset for this projector are easily swallowed by young children and this is dangerous. Keep loose button cells away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed.
Charging the battery • Charges the battery when the (low battery indicator) appears on the screen. The LED indicator lights orange when charging the battery. Lights yellow-green when the battery is fully charged. Note: • Please switch the power to off before charging the battery. •...
The battery icons indicate battery level as following: Full: The battery icon disappears in few seconds. Medium: The battery icon disappears in few seconds. Low: The battery icon remain on for a longer time. Nearly empty: The battery icon flashes for a few seconds to alert.
Connection Insert a memory card 1. Lift open the plastic cover. . Insert your memory card into the appropriate slot according to the orientation marked on the card slot, then close the cover. Memory cards 3. To remove the memory card, flip out the (not supplied) plastic cover, and then push the memory card to eject it from the card slot.
Getting started Turn the power on/off • Slide the power switch to ON. The projector begins to project an image and the charging indicator turns yellow-green. Note: The video output on some video devices is defaulted to OFF. Please refer to the device’s manual to enable the video output.
Distance and projective image size • The distance between the screen and projector is 0.m at least. It recommends to project the image onto a white and flat surface. • The projector can be projected from 7 to 65 inches (17~1650 mm) diagonal image.
Basic operation Select a mode Battery Inputted status source Movie Photo Music Edit Setup 1. Once the power is turned on, the main menu will appear on the screen as illustrated above. . Press to select the desired mode, then press to enter.
Photo mode Photo Slideshows 1. Press to select Photo ( ) in the main menu, then press to enter. By default, the photo slideshow will playback automatically. To enter thumbnail mode, press . Press to select a desired photo, then press display the photo by slideshow.
Movie mode 1. Press Total File: 5 select Movie ( ) in the main /dev/card1/1 Video 01 menu, then press to enter. Video Video 0 Music Video 0 Photo Video 04 Video 05 . Press to select a desired video, then press playback.
Music mode 1. Press Total File: 5 select Music ( ) in the main /dev/card1/1 Song 01 menu, then press to enter. Video Song 0 Music Song 0 Photo Song 04 Song 05 . Press to select a desired music, then press playback.
Edit . Repeat the step 1 and to 1. Press select Edit ( ) in the main highlight more files, then press to highlight Edit button. menu, then press to enter. . Press in order to select the folder from left side window if more folders are available, then press to enter flie list on the right side...
Page 21
6. Press to enter to left side 9. Press to select window, then press Paste, then press to select an destination drive or folder to be saved. 7. Press to return right side window, press again to highlight Edit. . Press to bring up the Edit dialogue window.
Delete Create a new folder 1. Follow the steps 1-4 of Copy 1. Press to enter the left side to bring up the Edit dialogue window, then press window. to select the drive you wish to create a new folder. .
Page 23
. Press to highlight Edit, then press 4. An Edit dialogue window appears on the screen. Press to highlight New Folder, then press 5. A virtual keyboard appears on the screen, press to text the folder name and then press Enter to confirm.
Copy files from and to a PC Copy files from a computer to this unit 1. Connect the mini-USB connector to the projector, and the regular USB connectors to Example: two available USB ports on your Laptop (not supplied) . Turn on the power of this projector.
Setup 1. Press select Setup ( ) in the main menu, then press to enter. . Press buttons to select or cycle through available options. . Press to confirm. Option Sub-options Description Lamp mode General Adjust the color balance according to the Mode ambient light of the projector’s location.
Page 26
Option Sub-options Description Slideshow Power ON Enable or disable the sound when opening the Setup Music projector. Options: On, Off Custom Select the preference language to display on Setup Language the screen. Options: English, French, German, Italian Spanish, Portuguese, Dutch, Polish Auto Power Set the timer for standby mode if the projector is inactive status.
Helpful Tips No image projects • Check if the power adapter is plugged securely into the power outlet. • Check if the Power switch on the projector is set to on. • Check if no power in the power outlet. •...
Need help?
Do you have a question about the pj200 and is the answer not in the manual?
Questions and answers