Sirius Satellite Radio MT3525 Instruction Manual page 2

Set receiver function switch to WIRELESS HEAD-
PHONE position. Connect as shown on picture
"Fig.1". Switch ON the headphones with pow-
er/volume switch. Push RESET button and then
SCAN button.
EN
Wireless headset (for PC net audio chat)
Set receiver function switch to AUDIO CHAT posi-
tion. Connect as shown on picture "Fig.2" includ-
ing microphone cable to microphone socket in
the computer. Place the receiver close to speak-
ing person (about 1 meter) and aim microphone
"Fig.3". Switch ON the headphones with power/
volume switch. Push RESET button and then
SCAN button.
Monitoring
This mode require battery power for the receiver.
Set receiver function switch to MONITORING po-
sition. Place receiver close the person You want
to monitored (np. elderly peoples, kids). Switch
ON the headphones with power/volume switch.
Push RESET button and then SCAN button.
Listening radio FM
For listening radio FM receiver is useless. Switch
ON the headphones with power/volume switch.
Push RESET button and then SCAN button. Ra-
dio will automatically fi nd active radio channel.
To change the station (frequency) push SCAN
button again. When the top frequency will be
reached, please push RESET button and SCAN to
begging from the start of the frequency scale.
Wired headphones
For using headphones as wired the receiver
is useless. Use the audio cable (jack to jack) to
connect headphones to sound source. Battery
power in headphones is not necessary.
Note. Always switch off receiver and head-
phones when not used to save battery.