After Operation; Opening The Bonnet And Side Covers - Yanmar EF494T Operator's Manual

AFTER OPERATION

1. After operation
DANGER
To cover the tractor for storage, allow at least 10
minutes of cooling time after the engine has been
stopped. Otherwise, a fire may start.
Wash the tractor with water, wipe off, and lubricate the
moving parts and sliding parts. Fill grease to the grease
nipples.
CAUTION
 Never fail to stop the engine before stating checks
and maintenance. You may be pulled into the
machine and be injured.
 Wait until the muffler and the engine get cool before
starting checks and maintenance.
NOTE:
Be careful not to spray water on electrical parts. Water
infiltration can cause a trouble in the electrical system.

2. Opening the bonnet and side covers

Opening/closing the bonnet
Opening
(1) Push down the bonnet lever (A) to release the
bonnet lock.
(2) Lift the bonnet and fix it with the stopper (B).
Closing
(1) Lift slightly up the bonnet to unlock the stopper
(B); mount the stopper (B) in the clip.
(2) Lower the bonnet and press it down until a click
is heard.
51
EF494T OM