MSI H170A PC MATE Manual page 40

Onboard LAN Controller [Enabled]
▶
Enables or disables the onboard LAN controller.
▶ LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings.
This item will appear when Onboard LAN Controller is enabled.
[Enabled]
[Disabled]
▶ Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled]
[Disabled]
▶ Ipv4 PXE Support [Enabled]
When "Enabled", the system UEFI network stack will support Ipv4 protocol. This
item will appear when "Network Stack" is enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.
▶ Ipv6 PXE Support [Enabled]
When "Enabled", the system UEFI network stack will support Ipv6 protocol. This
item will appear when "Network Stack" is enabled.
[Enabled] Enables the Ipv6 PXE boot support.
[Disabled] Disables the Ipv6 PXE boot support.
▶ SATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
[RAID Mode] Enables RAID function for SATA storage devices.
▶ SATAx Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support.
[Enabled]
[Disabled]
▶ HD Audio Controller [Enabled]
Enables or disables the onboard High Definition Audio controller.
HPET [Enabled]
▶
Enables or disables the HPET (High Precision Event Timers) support.
▶ Integrated Graphics Configuration
Adjusts integrated graphics settings for optimum system. Press <Enter> to enter the
sub-menu.
40
BIOS Setup
Enables the onboard LAN Boot ROM.
Disables the onboard LAN Boot ROM.
Enables UEFI network stack.
Disables UEFI network stack.
Host Controller Interface) offers some advanced features to enhance
the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
Enables hot plug support for the SATA ports.
Disables hot plug support for the SATA ports.