Advertisement
2.1.3 Removing the heat sink
(See Fig.5)
(1) Remove the two screws C and two screws D on the left
side of the main body.
2.1.4 Removing the bottom cover
(See Figs.6 and 7)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly and heat sink.
(1) Turn over the body and release the two joints c, two joints
d and joint e.
CAUTION:
Do not damage the main board when releasing the joint e us-
ing a screwdriver. (See Figs.6 and 7)
2.1.5 Removing the rear bracket
(See Fig.8)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
(1) Remove the three screws E, three screws F and two
screws G on the back of the body.
(2) Remove the rear bracket.
Heat sink
D
Fig.5
Joint c
Joint e
Fig.6
Bottom cover
Joint c
Fig.7
F
Rear bracket
E
Fig.8
KD-S790
C
Bottom cover
Joint d
Joint d
Joint e
G
F
E
(No.49788)1-5
Advertisement
