Specifications - Konig CMP-REPEATVGA3 Manual

VGA UTP extender 1X2 splitter with audio
Introduction
This VGA UTP extender 1X 2 splitter with audio is an ideal device for local displaying and remote
viewing. It combines split function and extension function. It distributes the input of the VGA signal and
audio signal into the two identical outputs simultaneously. Each receiver by Cat5x 1 works with the
sender as a full functional module by receiving the distributed signal from the sender and transmitting
to displays individually. Only by the most inexpensive UTP cable with cross stand inside, the full
functional module extends the VGA display to maximum 300 meters.
Features
This device has many features that enable it to perform in a superior manner. Among those features
you will find:
• Extends VGA video and stereo audio signal to maximum 300 meters over one UTP cable with
cross stand inside
• Supports a maximum resolution of 1920x1200
• Dual output at local unit: 1x VGA output for local site, plus 2x UTP output for remote site

Specifications

Input /Output connector
Input connector
Output connector
Operating frequency
Vertical frequency range
Resolutions (pc)
640X480
800X600
1024X768
1280X720
1280X768
1280X960
1280X1024
1600X900
1600X1200
1920X1080
1920X1200
Mechanical
Size of VGA UTP extender 1X 2 splitter
Weight of VGA UTP extender 1X 2 splitter
ENGLISH
VGA (female 15 pin), stereo audio
VGA (female 15 pin), stereo audio, 2x RJ45
60/75/85Hz
102×100×25 mm
298g
2