Reducing Image Retention - NEC split screen Model Operation Manual

Set "ADVANCED OSM" to "ON" in the FUNCTION menu.
On "PICTURE FREEZE" of "FUNCTION" menu, select
"BTM LEFT".
FUNCTION
ADVANCED OSM
POWER MGT.
INPUT SKIP
SUB. PICTURE
ZOOM NAV
PICTURE FREEZE
PDP SAVER
CLOSED CAPTION
CAPTION CONT
PWR. ON MODE
PROTOCOL SET
SEL. ADJ.
Information
PICTURE FREEZE Function
* This feature does not function during multi screen mode.
* Digital zoom is not available while this function is
operating.
* A further press of the ACTIVE SELECT button while
this function is operating will cancel this function.
* Providing a 2-screen display will cancel this function.
PICTURE FREEZE settings
OFF: Will not show the still image.
S BY S1, 2: The still images captured by pressing the
ACTIVE SELECT button will be shown on the sub
screen of side-by-side mode.
BTM LEFT~TOP LEFT: The still images captured by
pressing the ACTIVE SELECT button will be shown
on the sub screen of picture-in-picture mode.
Side-by-Side
PC/RGB
ACTIVE
SELECT
button
S BY S1
PC/RGB PC/RGB
or
S BY S2
PC/RGB PC/RGB

Reducing image retention

The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce image retention.
Set "ADVANCED OSM" to "ON" in the FUNCTION menu.
On "PDP SAVER" of "FUNCTION" menu, select
"MANUAL", then press the MENU/ENTER button.
The "PDP SAVER" screen appears.
: OFF
: OFF
: OFF
: BTM LEFT
: BTM LEFT
: MANUAL
: OFF
: LOW
: OFF
RETURN
EXIT
Picture-in-Picture
PC/RGB
ACTIVE
SELECT
button
PC/RGB PC/RGB
En-29
PDP SAVER
PEAK BRIGHT
ORBITER
INVERSE/WHITE
SCREEN WIPER
SOFT FOCUS
OSM ORBITER
OSM CONTRAST
SEL. ADJ.
Information
When set to AUTO
Set automatically, as described below.
PEAK BRIGHT: 100%
ORBITER: AUTO1 or AUTO2
INVERSE/WHITE: OFF
SCREEN WIPER: OFF
SOFT FOCUS: OFF
OSM ORBITER: ON
OSM CONTRAST: LOW
PEAK BRIGHT
Use this to activate the brightness limiter.
Example: Setting "PEAK BRIGHT" to "75%"
On "PEAK BRIGHT" of "PDP SAVER" menu, select "75%".
P D P S AV E R
P E A K B R I G H T
O R B I T E R
I N V E R S E / W H I T E
S C R E E N W I P E R
S O F T F O C U S
O S M O R B I T E R
O S M C O N T R A S T
SEL. ADJ.
Information
PEAK BRIGHT settings
100%: The brightness of the screen is adjusted
automatically to suit the picture quality.
75%, 50%, 25%: Sets maximum brightness.
The brightness level decreases in the order of 75%,
50%, 25%. 25% provides minimum brightness.
* These values are approximate.
ORBITER
Use this to set the picture shift.
Example: Setting "ORBITER" to "AUTO2"
On "ORBITER" of "PDP SAVER" menu, select "AUTO2".
PDP SAVER
PEAK BRIGHT
ORBITER
INVERSE/WHITE
SCREEN WIPER
SOFT FOCUS
OSM ORBITER
OSM CONTRAST
SEL. ADJ.
Information
ORBITER settings
OFF: Orbiter mode does not function.
This is the default setting when PC/RGB is input.
AUTO1: The picture moves around the screen
intermittently, making the picture smaller. This is the
default setting when a Video or a DVD/HD signal is
input. Set to "OFF" when these signals are not used.
AUTO2: The picture moves around the screen
: 100%
: AUTO1
: OFF
: OFF
: OFF
: ON
: LOW
RETURN
EXIT
: 7 5 %
: AU TO 1
: O F F
: O F F
: O F F
: O N
: L OW
RETURN
EXIT
: 100%
: AUTO2
: OFF
: OFF
: OFF
: ON
: LOW
EXIT RETURN